this is a script to setup PPPwn on the raspberry pi and run GoldHen on the PS4 fw 11.0
https://www.youtube.com/watch?v=ebaVTBpM2-0
you need to install Raspberry Pi OS Lite onto a sd card.
place the sd card into your computer and copy the PPPwn folder to the sd card.
place the sd card into the raspberry pi and run the following commands
sudo chmod 777 /boot/firmware/PPPwn/install.sh
sudo bash /boot/firmware/PPPwn/install.sh
once the pi reboots pppwn will run automatically.
On your PS4:
- Go to
Settings
and thenNetwork
- Select
Set Up Internet connection
and chooseUse a LAN Cable
- Choose
Custom
setup and choosePPPoE
forIP Address Settings
- Enter anything for
PPPoE User ID
andPPPoE Password
- Choose
Automatic
forDNS Settings
andMTU Settings
- Choose
Do Not Use
forProxy Server
for GoldHen you need to place the goldhen.bin file onto the root of a usb drive and plug it into the console
once everything is setup and the ethernet cable is plugged in between the pi and the console the pi should automatically try and pwn the console.
the exploit may fail many times but the pi will continue to purge the console to keep trying to pwn itself.
once pwned the process will stop and the pi will shut down.
you will need to restart the pi if you wish to pwn the console again.
the idea is you boot the console and the pi together and the pi will keep trying to pwn the console without any input from you, just wait on the home screen until the pppwn succeedes.
you can edit the exploit scripts by putting the sd card in your computer and going to the PPPwn folder.