You will be making a timer that:
- Counts up to 10 seconds
- Increments every 10 ms
- Has digits change to red when it gets to 10 seconds
- Should not count past 10 seconds
If you compelete the timer with time to spare:
- SG1: Implement a start button. The digital timer should not start until the button is pressed.
- SG2: Once you have a start button working, configure it so that when a user presses the start button it is disabled and not enabled until the timer finishes.
- SG3: Once you have finished SG2, add new new button called
reset
that resets the timer to 0:00:00 and then pressing the start button again will start the timer from 0. - SG4: Finally, if you have completed all the stretch goals, spend some time styling your timer and buttons.