Issues
- 1
Setting flow control for ISO15765 11bit Id
#106 opened by czechu82 - 0
Add ISO-TP (ISO15765) support.
#101 opened by dfieschko - 1
Add support for Unified Diagnostic Services
#63 opened by dfieschko - 0
- 3
More complete examples
#25 opened by rmelian - 0
Add J1939Client class
#38 opened by dfieschko - 0
- 0
- 0
- 0
Add dunder methods for classes in RP1210.py
#68 opened by dfieschko - 0
Add vendor, device, and api properties to RP1210VendorList (and thus to RP1210Client)
#86 opened by dfieschko - 0
Rename RP1210Config to RP1210Vendor
#91 opened by dfieschko - 0
Add baud selection to RP1210VendorList.
#90 opened by dfieschko - 0
Add protocol selection to RP1210VendorList.
#89 opened by dfieschko - 0
Add J1708.py with J1708Message class.
#88 opened by dfieschko - 0
Add J1708 commands
#87 opened by dfieschko - 0
- 0
RP1210API.GetErrorMsg should fall back to translating the error message rather than translating GetErrorMsg's return code.
#75 opened by dfieschko - 0
- 0
Allow RP1210Client and RP1210VendorList to initialize from alternate directories
#62 opened by dfieschko - 0
- 0
- 0
Set up a self-hosted runner to automatically run tests with physical adapters
#73 opened by dfieschko - 0
Detect mangled RP121032.INI
#31 opened by dfieschko - 0
PCAN-RP1210 sometimes reports ClientIDs wrong
#66 opened by dfieschko - 0
Add J1939 handshake functionality
#35 opened by dfieschko - 0
Rework J1939Message class
#46 opened by dfieschko - 0
Add function to RP1210Client for 'Is the VDA operating in a wireless mode? (48)'
#28 opened by dfieschko - 0
Set Broadcast List commands
#29 opened by dfieschko - 0
Have Client automatically handle echo flag based on whether echo command has been sent
#47 opened by dfieschko - 1
Add CANID parameter to J1939Message
#53 opened by dfieschko - 2
Implement a SendCommand convenience class.
#12 opened by dfieschko - 1
- 1
- 0
Add getVendorName() function to RP1210Client
#61 opened by dfieschko - 0
- 1
Make J1939Request 8 bytes
#52 opened by dfieschko - 0
Finish/fix J1939 diagnostic message parsers
#39 opened by dfieschko - 1
Implement KWP2000 functions.
#7 opened by dfieschko - 1
Implement IS09141 functions.
#8 opened by dfieschko - 0
Add RP1210Client class that takes care of common functions like clientID handling, message construction, etc.
#20 opened by dfieschko - 0
Test isDM() functions
#32 opened by dfieschko - 0
Tests are not as exhaustive as they could be.
#15 opened by dfieschko - 0
- 1
Narrow down exception handling ~ most try-except blocks catch Exception, which is too general
#23 opened by dfieschko - 0
- 0
- 0
Implement RP1210_GetLastErrorMsg
#10 opened by dfieschko - 0
Move DLL loading into RP1210API.
#9 opened by dfieschko - 0
Implement RP1210_Ioctl
#13 opened by dfieschko