My brand new .files (dotfiles).
cd ~
git clone git@github.com:dhilipsiva/.files.git
pip3 install tmuxp
cp .files/home.* ~
Install Vim Plug: https://github.com/junegunn/vim-plug
cd
git clone git@github.com:dhilipsiva/.files.git
cd .files
cp .env.template .env # And change the required values
pipenv shell
pipenv install
fab setup
First, use xinput
command to get the name of touchpad. It most probably is a device that has the prefix 'Touchpad' in its name.
For instance, it will be somethine like: MSFT0001:00 06CB:7E7E Touchpad
Create a file /etc/X11/xorg.conf.d/touchpad-tap.conf
with these following contents:
Section "InputClass"
Identifier "libinput touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
Option "Tapping" "on"
EndSection
And finally for this config to take place immedietly, run the following command.
xinput set-prop "MSFT0001:00 06CB:7E7E Touchpad" "libinput Tapping Enabled" 1