eksctl
is a simple CLI tool for creating clusters on EKS - Amazon's new managed Kubernetes service for EC2. It is written in Go, and uses CloudFormation.
You can create a cluster in minutes with just one command – eksctl create cluster
!
Need help? Join Weave Community Slack.
To download the latest release, run:
curl --silent --location "https://github.com/weaveworks/eksctl/releases/download/latest_release/eksctl_$(uname -s)_amd64.tar.gz" | tar xz -C /tmp
sudo mv /tmp/eksctl /usr/local/bin
Alternatively, macOS users can use Homebrew:
brew tap weaveworks/tap
brew install weaveworks/tap/eksctl
and Windows users can use chocolatey:
chocolatey install eksctl
You will need to have AWS API credentials configured. What works for AWS CLI or any other tools (kops, Terraform etc), should be sufficient. You can use ~/.aws/credentials
file
or environment variables. For more information read AWS documentation.
You will also need AWS IAM Authenticator for Kubernetes command (either aws-iam-authenticator
or aws eks get-token
(available in version 1.16.156 or greater of AWS CLI) in your PATH
.
To create a basic cluster, run:
eksctl create cluster
A cluster will be created with default parameters
- exciting auto-generated name, e.g. "fabulous-mushroom-1527688624"
- 2x
m5.large
nodes (this instance type suits most common use-cases, and is good value for money) - use official AWS EKS AMI
us-west-2
region- dedicated VPC (check your quotas)
- using static AMI resolver
Once you have created a cluster, you will find that cluster credentials were added in ~/.kube/config
. If you have kubectl
v1.10.x as well as aws-iam-authenticator
commands in your PATH, you should be
able to use kubectl
. You will need to make sure to use the same AWS API credentials for this also. Check EKS docs for instructions. If you installed eksctl
via Homebrew, you should have all of these dependencies installed already.
Example output:
$ eksctl create cluster
[ℹ] using region us-west-2
[ℹ] setting availability zones to [us-west-2a us-west-2c us-west-2b]
[ℹ] subnets for us-west-2a - public:192.168.0.0/19 private:192.168.96.0/19
[ℹ] subnets for us-west-2c - public:192.168.32.0/19 private:192.168.128.0/19
[ℹ] subnets for us-west-2b - public:192.168.64.0/19 private:192.168.160.0/19
[ℹ] nodegroup "ng-98b3b83a" will use "ami-05ecac759c81e0b0c" [AmazonLinux2/1.11]
[ℹ] creating EKS cluster "floral-unicorn-1540567338" in "us-west-2" region
[ℹ] will create 2 separate CloudFormation stacks for cluster itself and the initial nodegroup
[ℹ] if you encounter any issues, check CloudFormation console or try 'eksctl utils describe-stacks --region=us-west-2 --name=floral-unicorn-1540567338'
[ℹ] 2 sequential tasks: { create cluster control plane "floral-unicorn-1540567338", create nodegroup "ng-98b3b83a" }
[ℹ] building cluster stack "eksctl-floral-unicorn-1540567338-cluster"
[ℹ] deploying stack "eksctl-floral-unicorn-1540567338-cluster"
[ℹ] building nodegroup stack "eksctl-floral-unicorn-1540567338-nodegroup-ng-98b3b83a"
[ℹ] --nodes-min=2 was set automatically for nodegroup ng-98b3b83a
[ℹ] --nodes-max=2 was set automatically for nodegroup ng-98b3b83a
[ℹ] deploying stack "eksctl-floral-unicorn-1540567338-nodegroup-ng-98b3b83a"
[✔] all EKS cluster resource for "floral-unicorn-1540567338" had been created
[✔] saved kubeconfig as "~/.kube/config"
[ℹ] adding role "arn:aws:iam::376248598259:role/eksctl-ridiculous-sculpture-15547-NodeInstanceRole-1F3IHNVD03Z74" to auth ConfigMap
[ℹ] nodegroup "ng-98b3b83a" has 1 node(s)
[ℹ] node "ip-192-168-64-220.us-west-2.compute.internal" is not ready
[ℹ] waiting for at least 2 node(s) to become ready in "ng-98b3b83a"
[ℹ] nodegroup "ng-98b3b83a" has 2 node(s)
[ℹ] node "ip-192-168-64-220.us-west-2.compute.internal" is ready
[ℹ] node "ip-192-168-8-135.us-west-2.compute.internal" is ready
[ℹ] kubectl command should work with "~/.kube/config", try 'kubectl get nodes'
[✔] EKS cluster "floral-unicorn-1540567338" in "us-west-2" region is ready
$
Install eksctl
following the installation instructions.
To learn more abut what eksctl
can do check eksctl.io. A good place to start is
Getting Started. The full list of features can be found
here.
Code contributions are very welcome. If you are interested in helping make eksctl
great then see our contributing guide.
Minor releases of eksctl
should be expected every two weeks and patch releases will be made available as needed.
One or more release candidate(s) (RC) builds will be made available prior to each minor release. RC builds are intended only for testing purposes.
Create an issue, or login to Weave Community Slack (#eksctl) (signup).
Logo Credits
Original Gophers drawn by Ashley McNamara, unique E, K, S, C, T & L Gopher identities had been produced with Gopherize.me.