dieface/0x-api

An HTTP Interface to 0x liquidity and tooling

Table of contents

• Introduction
• Services
  • HTTP Services
  • Data Services
• Getting started
  • Pre-requirements
  • Developing
• Commands
• Database
• Deployment
• Release
• Legal Disclaimer

Introduction

The 0x API is a collection of services and endpoints that can be run together or separately. In aggregate, the APIs provide interfaces to 0x liquidity. Everything can be run monolithically via yarn start and docker-compose up as described in Getting Started.

Services

The API contains different services that serve a collection of HTTP or websocket endpoints and keep your order states in sync with the Ethereum state.

HTTP Services

These are services that handle HTTP requests and responses.

Name	Path	Run Command	Requires Ethereum JSON RPC Provider?	Requires Relational Database?
All HTTP Services	/*	yarn start:service:http	Yes	Yes
Swap	/swap	yarn start:service:swap_http	Yes	Yes
Orderbook	/orderbook	yarn start:service:sra_http	No	Yes
Meta Transaction Service	/meta_transaction	yarn start:service:meta_transaction_http	Yes	Yes

Data Services

The transaction watcher ensures that the data being served is present and up-to-date by keeping the database in sync with Ethereum. The endpoints above run without it, but would be providing degraded or non-functional service.

Name	Run Command	Requires Ethereum JSON RPC Provider?	Requires Relational Database?
Transaction Watcher (monitor and broadcast meta transactions)	yarn start:service:transaction_watcher	Yes	Yes

Getting started

Pre-requirements

• Node.js > v8.x
• Yarn > v1.x
• Docker > 19.x

Developing

To get a local development version of 0x-api running:

1. Clone the repo.

2. Create an .env file and copy the content from the .env_example file. Defaults are defined in config.ts/config.js. The bash environment takes precedence over the .env file. If you run source .env, changes to the .env file will have no effect until you unset the colliding variables.

Environment Variable	Default	Description
CHAIN_ID	Required. No default.	The chain id you'd like your API to run on (e.g: 1 -> mainnet, 42 -> Kovan, 3 -> Ropsten, 1337 -> Ganache). Defaults to 42 in the API, but required for docker-compose up.
ETHEREUM_RPC_URL	Required. No default.	The URL used to issue JSON RPC requests. Use http://ganache:8545 to use the local ganache instance.
LIQUIDITY_POOL_REGISTRY_ADDRESS	Optional. No default	The Ethereum address of a Liquidity Provider registry. If unspecified, no Liquidity Provider is used.
POSTGRES_URI	Required. Default for dev: postgresql://api:api@localhost/api	A URI of a running postgres instance. By default, the API will create all necessary tables. A default instance is spun up in docker-compose up
POSTGRES_READ_REPLICA_URIS	Optional. No default	A comma separated list of URIs of running postgres read replica instances.
FEE_RECIPIENT_ADDRESS	0x0000000000000000000000000000000000000000	The Ethereum address which should be specified as the fee recipient in orders your API accepts.
MAKER_FEE_ASSET_DATA	0x	The maker fee token asset data for created 0x orders.
TAKER_FEE_ASSET_DATA	0x	The taker fee token asset data for created 0x orders.
MAKER_FEE_UNIT_AMOUNT	0	The flat maker fee amount you'd like to receive for filled orders hosted by you.
TAKER_FEE_UNIT_AMOUNT	0	The flat taker fee amount you'd like to receive for filled orders hosted by you.
WHITELIST_ALL_TOKENS	false	A boolean determining whether all tokens should be allowed to be posted.
SWAP_IGNORED_ADDRESSES	[]	A comma separated list of addresses to ignore. These addresses are persisted but not used in any /swap/* endpoints
META_TXN_SUBMIT_WHITELISTED_API_KEYS	[]	A comma separated list of whitelisted 0x API keys that can use the meta-txn /submit endpoint.
META_TXN_RELAY_PRIVATE_KEYS	[]	A comma separated list of meta-txn relay sender private keys managed by the TransactionWatcherSignerService.
META_TXN_SIGNING_ENABLED	true	A boolean determining whether the meta-txn signs and submits transactions .
META_TXN_MAX_GAS_PRICE_GWEI	50	The maximum gas price (in gwei) the meta-txn service will submit a transaction at. If the gas price of the network exceeds this value then the meta-txn service will be disabled.
META_TXN_RELAY_EXPECTED_MINED_SEC	Default: 120	The expected time for a meta-txn to be included in a block.
ENABLE_PROMETHEUS_METRICS	Default: false	A boolean determining whether to enable prometheus monitoring.
PROMETHEUS_PORT	Default: 8080	The port from which prometheus metrics should be served.
KAFKA_BROKERS	Optional. No default.	A comma separated list of Kafka broker servers
KAFKA_TOPIC_QUOTE_REPORT	Optional. No default	The name of the Kafka topic to publish quote reports on. Setting this and KAFKA_BROKERS enable publirhing.

3. Install the dependencies:

   yarn

4. Build the project:

   yarn build

5. Run docker-compose up to run the other dependencies required for the API. This uses the local docker-compose.yml file.

6. Run the database migrations:

yarn db:migrate

7. Start the API

   yarn start

   For development:

   yarn dev

Developing on Ganache

To use ganache, use the .env file below:

CHAIN_ID=1337
ETHEREUM_RPC_URL=http://ganache:8545

Then run

$ docker-compose up
$ yarn dev

Testing

Run yarn test. It's really that easy :)

Tip: Test suites set up and teardown sandboxed environments, so using .only on it and describe statements will save lots of development time.

Commands

• yarn build - Build the code
• yarn test - Test the code
• yarn lint - Lint the code
• yarn start - Starts the API
• yarn dev - Starts the API in dev-mode
• yarn watch - Watch the source code and rebuild on change
• yarn prettier - Auto-format the code
• yarn release - Release a new version of the 0x-api

Deployment

A Docker image is built and hosted by Dockerhub every time a change to the master branch occurs. A Docker image is built, pushed and tagged when a new version is released as well. Running this image will run 0x API as a monolith, with all its dependencies. You can run any of the services separately by overriding the Docker command with the service-specific command when running the container.

When versioning the API, we freeze the old version in a separate branch so that we can deploy patches, and continue to support the old version until it's officially deprecated. Be aware when contributing fixes that you may want to apply the fix to an older version too.

This is a list of endpoints supported by different versions of the API. If an endpoint is not on this list, it is by default pointed to the master branch.

Endpoint(s)	API version branch	@0x/asset-swapper branch
/swap/v0/, /meta_transaction/v0	https://github.com/0xProject/0x-api/tree/freeze/swap-v0	https://github.com/0xProject/0x-monorepo/tree/v0-asset-swapper
/sra/v3	https://github.com/0xProject/0x-api/tree/freeze/sra-v3	N/A

Release

Releases are triggered automatically by the release GitHub action. They can also be triggered manually by using yarn release, which requires a GITHUB_TOKEN environment variable.

Database

This project uses TypeORM. It makes it easier for anyone to switch out the backing database used by this project. By default, this project uses a PostgreSQL database.

To add a migration, you may use the following command:

yarn db:migration:create -n myMigration

Legal Disclaimer

The laws and regulations applicable to the use and exchange of digital assets and blockchain-native tokens, including through any software developed using the licensed work created by ZeroEx Intl. as described here (the “Work”), vary by jurisdiction. As set forth in the Apache License, Version 2.0 applicable to the Work, developers are “solely responsible for determining the appropriateness of using or redistributing the Work,” which includes responsibility for ensuring compliance with any such applicable laws and regulations. See the Apache License, Version 2.0 for the specific language governing all applicable permissions and limitations: http://www.apache.org/licenses/LICENSE-2.0