P3I1_FWProject
These firmware files were created using tools other developrs made. My intention is to make this easier; All credit to mefistotelis for his work. Please review his repo here and please give all credit and or donations to mefistotelis
https://github.com/o-gs/dji-firmware-tools
INSPIRE 1 PILOTS PLEASE READ!!!! I have had some reports on the x5 and x5r camera that the modded firmware doesnt work and after flashing the gimbal is going dead. I do not understand why this is. For the time being, I DO NOT RECOMMEND X5/X5R users using this firmware. Github does not allow me to delete, this is a warning and advisory to Inspire 1 pilots.
The intention of this repo is to document and share customized firmware files for the DJI Phantom 3 series and the Inspire 1 series aircraft. The customized firmware files will provide modifications to the flight controller module which will enable greater speed, removed height restrictions, removed flight zone restrictions as well as removed battery limits.
More information on Phantom 3 and Inspire 1 modding can be found in our wiki: http://dji.retroroms.info/howto/modp3params
Easy to use tool to execute the firmware tools can be found at https://github.com/digdat0/P3_i1_EasyMod https://github.com/digdat0/P3I1-FW-Toolv2
Currently uploaded firmware:
Height + NFZ Removal Available Versions:
- P3 Std (p3c): 1.09.0200
- P3 4k (P3XW): 1.06.0050
- P3 SE (p3se): 1.05.0040
- P3 Adv (p3s): 1.10.0090, 1.11.0020
- P3 Pro (p3x): 1.09.0060, 1.10.0090, 1.11.0020
- Inspire 1 (wm610): 1.10.01.40, 1.11.01.50
- Inspire 1 Pro (WM610_FC550): 1.11.01.50
- Inspire 1 Pro RAW (WM610_FC550R): 1.11.01.50
Height + NFZ Removal + Faster Speed Available Versions:
- P3 Std (p3c): 1.09.0200
- P3 4k (P3XW): 1.06.0050
- P3 SE (p3se): 1.05.0040
- P3 Adv (p3s): 1.10.0090, 1.11.0020
- P3 Pro (p3x): 1.09.0060, 1.10.0090, 1.11.0020
- Inspire 1 (wm610): 1.10.01.40, 1.11.01.50
- Inspire 1 Pro (WM610_FC550): 1.11.01.50
- Inspire 1 Pro RAW (WM610_FC550R): 1.11.01.50
Height + NFZ Removal + Faster Speed +Battery Limits Removed Available Versions:
- P3 Std (p3c): 1.09.0200
- P3 4k (P3XW): 1.06.0050
- P3 SE (p3se): 1.05.0040
- P3 Adv (p3s): 1.10.0090, 1.11.0020
- P3 Pro (p3x): 1.09.0060, 1.10.0090, 1.11.0020
- Inspire 1 (wm610): 1.10.01.40, 1.11.01.50
- Inspire 1 Pro (WM610_FC550): 1.11.01.50
- Inspire 1 Pro RAW (WM610_FC550R): 1.11.01.50
---- Usage of these files ----
Its simple, download the firmware file, rename it, copy to sd card, put into aircraft and power it on.
Detailed steps:
- Download the proper file for your aircraft and firmware version. Choose wisely.
- The file you are downloading is the 306.bin file, like P3X_FW_V01.11.0020_m0306.bin_MODDED
- Rename the downloaded file.
- Phantom 3 = PMCAPPFw3.bin
- Inspire 1 = INMCAPPFw1.bin
- Copy the file to your SD card. Put SD card into the aircraft.
- Power on the aircraft. Update will start in about 30 seconds. You will hear a distinct noise during the update process, which will change when done. It should take 3-5 minutes.
** If the update does not start, please turn off aircraft. Press and hold the bind button, and turn back on. Hold this button for 20-30 seconds and the update will start and will make a beeping noise, then you can let go and let the update finish.
- When update is done, power off the aicraft. Remove the SD card from the camera and back into the computer
- Remove/ Delete the "PMCAPPFw3.bin_updated" or "INMCAPPFw1.bin_updated" file from the SD card Note: If the file is "PMCAPPFw3.bin_damaged" or "INMCAPPFw1.bin_damaged" the update did not complete, retry it.
- Put Sd card back in the camera
All done! On your next startup, the modifications will persist on the aircraft. They will remain until you reflash the stock firmware.