IoT Setup Tutorial by Team Digipodium

Introduction

We will guide you through the process of setting up the uPyCraft IDE on a Windows PC for programming IoT devices.

prerequisite

Install python

Step 1: Download uPyCraft IDE

Visit the following link: uPyCraft IDE Installation
Follow the instructions provided by Team Digipodium to download the uPyCraft IDE.

Step 2: Install uPyCraft IDE

Locate the downloaded uPyCraft IDE installation file.
Double-click on the installation file to begin the installation process.
Follow the on-screen instructions provided by Team Digipodium to complete the installation.

Step 3: Connect IoT Device

Connect your IoT device (ESP8266) to your Windows PC using a USB cable.
Ensure the device is recognized by your PC and the necessary drivers are installed.

Step 4: Open uPyCraft IDE

Launch the uPyCraft IDE that you installed in Step 2.
You should see a user-friendly interface where you can write and upload code to your IoT device.

Step 5: Start Programming

Write your Python code in the editor provided by uPyCraft IDE.
Use the IDE's features to upload the code to your IoT device and run it.

Troubleshooting

Download and Install Microsoft Visual C++ Redistributable:

Download from the links below. We suggest you install both the x86 and x64 versions.

x86: https://download.microsoft.com/download/1/6/5/1...

x64: https://download.microsoft.com/download/1/6/5/1...

We suggest also installing "Microsoft Visual C++ 2015 - 2022 Redistributable".