The default IDE is set to STM32CubeIDE, to change IDE open the STM32F429I_DISCO_REV_E01.ioc with CubeMX and select from the supported IDEs (EWARM from version 8.50.9, MDK-ARM, and STM32CubeIDE). Supports flashing of the STM32F429I_DISCO_REV_E01 board directly from TouchGFX Designer using GCC and STM32CubeProgrammer. Flashing the board requires STM32CubeProgrammer which can be downloaded from the ST webpage.
This TBS is configured for 320 x 240 pixels 16bpp screen resolution.
Performance testing can be done using the GPIO pins designated with the following signals: VSYNC_FREQ - Pin PE2, RENDER_TIME - Pin PE3, FRAME_RATE - Pin PE4, MCU_ACTIVE - Pin PE5