Turing Machine

This is a simple program written in C to emulate two symbol turing machine.

How to use it?

You need two text files to run the program

Instruction cards
Initial Tape

Instruction cards

A regular turing machine instruction card would look something like this

Card Number: 1

Symbol	Write	Shift	Next_Card
0	0	L	2
1	1	R	3

First it contains the card number
Then the actions to take when the two symbols are encountered in the tape
For example in the card shown above
If 0 is encountered write 0 to the tape, shift left and go to card 2
If 1 is encountered write 1 to the tape, shift right and go to card 3

So, your text file would look like this

1
0 L 2
1 R 3

If you need more cards just append them below without any spaces
⚠️ The HAULT card number is always `0`
⚠️ The ENTRY card is the first card in the text file
See the cards directory for some reference

Initial Tape

You must provide a initial tape for the program to execute
Your text file should contain contents like shown below

1 0 1 1 0 1

Write the symbols with a single space

Compile

Compile the main.c file using the compiler of your choice

gcc main.c -o turing.out

Execute

Then execute the code in the following format

./turing.out <path to cards file> <path to tape file>

For example

./turing.out ./cards/unary_addition.txt ./tapes/unary_addition.txt
./turing.out ./cards/bb3.txt ./tapes/bb.txt

I have added some interesting turing machine cards and tapes in the folders

Unary Addition
1-state Busy Beaver
2-state Busy Beaver
2-state Busy Beaver
3-state Busy Beaver
4-state Busy Beaver

Result

You can see how the tape changes at each and every step and also you can see the number of ones written by the machine on the tape