/qmk-crkbd

My corne QMK configuration

Primary LanguageC

Corne Keyboard Firmware

This repository contains a custom firmware for the corne keyboard, built upon the QMK firmware.

Building the Firmware

Follow these steps to build the firmware:

  1. Install QMK on your machine by referring to the official guide.
  2. Clone this repository into the QMK firmware's keyboard directory. You can find it at qmk_firmware/keyboards/crkbd/keymaps/.
  3. Compile the firmware using the following command:
qmk compile -kb crkbd/rev1 -km qmk-crkbd

Flashing the Firmware

To flash the firmware onto your Corne keyboard, you have two options:

QMK Toolbox

  1. Download QMK Toolbox.
  2. Open QMK Toolbox and load the .hex file by selecting crkbd_rev1_qmk-crkbd.hex.
  3. Connect your corne keyboard and click the Flash button.

Command Line

qmk flash -kb crkbd/rev1 -km qmk-crkbd