dinyar/uGMTfirmware

Issues

• Do not extrapolate phi to the vertex if the charge is invalid

  #382 opened 7 years ago by thomreis
  0

• Allow tests to be run if mp7fw not present

  #381 opened 7 years ago by dinyar
  2

• Introduce mechanism to mark invalid lumi sections

  #380 opened 8 years ago by dinyar
  0

• Release ugmt v4.1.0

  #379 opened 8 years ago by dinyar
  0

• Fix building from CACTUS

  #363 opened 8 years ago by dinyar
  1

• Propagate extrapolated eta coordinates to output

  #374 opened 8 years ago by dinyar
  1

• Fix sign bug in eta extrapolation

  #370 opened 8 years ago by dinyar
  2

• Modifications to eta extrapolation LUT

  #378 opened 8 years ago by dinyar
  1

• Increase range of phi extrapolation

  #369 opened 8 years ago by dinyar
  4

• Fix serializer testbench

  #377 opened 8 years ago by dinyar
  0

• Implement address-based cancel-out for EMTF

  #342 opened 9 years ago by dinyar
  0

• Tweak synthesis options to close timing

  #376 opened 8 years ago by dinyar
  0

• Swap fields for extrapolated and original phi coordinates at output

  #375 opened 8 years ago by dinyar
  0

• Remove unnecessary testfile setup in testbench

  #372 opened 8 years ago by dinyar
  0

• Clean up pattern files

  #373 opened 8 years ago by dinyar
  0

• Don't bit shift extrapolation correction to eta value

  #371 opened 8 years ago by dinyar
  0

• Fix timing problems

  #359 opened 8 years ago by dinyar
  0

• Propagate extrapolated phi values to uGT

  #356 opened 8 years ago by dinyar
  0

• Make it possible to use relative paths in makeProject.sh

  #361 opened 8 years ago by dinyar
  0

• Fix timing when activating zero-suppression in mp7fw

  #360 opened 8 years ago by dinyar
  0

• Release uGMT v4.0.0

  #364 opened 8 years ago by dinyar
  2

• Complete area constraints

  #365 opened 8 years ago by dinyar
  0

• Reduce fanouts for serializer logic

  #366 opened 8 years ago by dinyar
  0

• Release ugmt v4.0.0_patch1

  #367 opened 8 years ago by dinyar
  0

• Re-enable zero suppression

  #368 opened 8 years ago by dinyar
  0

• Allow also branches from CACTUS to be used as base firmware for uGMT

  #362 opened 8 years ago by dinyar
  0

• Release v3.0.0

  #358 opened 8 years ago by dinyar
  0

• Move to mp7fw v2.2.0

  #357 opened 8 years ago by dinyar
  0

• Change winning precedence after tie in intra-TF cancel-out

  #333 opened 9 years ago by dinyar
  2

• Release v2.2.0_patch1

  #355 opened 8 years ago by dinyar
  0

• Delay BGo Signals before use

  #344 opened 8 years ago by dinyar
  19

• Increase effort level in Vivado

  #354 opened 8 years ago by dinyar
  0

• Release uGMT v2.2.0

  #353 opened 8 years ago by dinyar
  0

• Update timing check script

  #352 opened 8 years ago by dinyar
  0

• Fix broken timing

  #349 opened 8 years ago by dinyar
  4

• Testbench was not checking intermediate muons

  #351 opened 8 years ago by dinyar
  0

• Move to Vivado 2016.1

  #350 opened 8 years ago by dinyar
  0

• Increase cancel-out LUT size for B/OMTF

  #347 opened 8 years ago by dinyar
  5

• Add register to store algo revision

  #348 opened 9 years ago by dinyar
  8

• Increase algo latency by 1 frame

  #343 opened 9 years ago by dinyar
  1

• Increase default readout window

  #346 opened 9 years ago by dinyar
  3

• Modify debugging outputs to send marker for bunch counter

  #345 opened 9 years ago by dinyar
  0

• Timing doesn't close

  #341 opened 9 years ago by dinyar
  0

• Fail uGMT build of timing isn't met

  #340 opened 9 years ago by dinyar
  0

• Valid bit from calorimeter should be delayed less than valid bit from muons

  #339 opened 9 years ago by dinyar
  0

• Optimize energy deserialization

  #334 opened 9 years ago by dinyar
  1

• Extrapolation LUTs too large in address table

  #337 opened 9 years ago by dinyar
  0

• Bug in extrapolation of phi coordinate

  #336 opened 9 years ago by dinyar
  0

• Migrate to mp7fw v2.0.0

  #335 opened 9 years ago by dinyar
  0

• Rename nodes for muon counters

  #332 opened 9 years ago by dinyar
  1