TFA KlimaLogg Pro for Home Assistant

TFA KlimaLogg Pro custom component to use with Home Assistant.

Experimental! Prototype!

Installation

Use HACS and add this repository as a custom repository of category Integration. URL: https://github.com/z8i/ha_custom_klimaloggpro

Attention: USB Device!

TFA KlimaLogg Pro weather station includes an USB Transceiver, which is used by this integration. So the stick needs to be physically connected to the computer which runs Home Assistant.

Tested and works under following circumstances:

Manual Home Assistant Installation on a Raspberry Pi with Raspberry Pi OS (Raspbian) USB-access is configured for user access:

It needs usb access to work properly, maybe you need to grant usb access to the USB-Transceiver by

adding the user to plugdev group
sudo adduser <username> plugdev
add following rule to /etc/udev/rules.d/50-usb-perms.rules:
SUBSYSTEM=="usb", ATTRS{idVendor}=="6666", ATTRS{idProduct}=="5555", GROUP="plugdev", MODE="0660"

To check for success:

  lsusb 
  Bus 001 Device 004: ID 6666:5555 Prototype product Vendor ID 
  # should show the klimlogg receiver, here bus 001 device 004 
  ls -l /dev/bus/usb/001/004 
  # expected output would be 
  crw-rw-rw- 1 root plugdev 189, 3 Dec 21 21:52 /dev/bus/usb/001/004
  # now group plugdev can access the device and everything should work

More Info

This integration uses kloggpro-Module from PyPI.