I forked and modified this to include a 3rd zone for my Onkyo receiver and I also added a "PAUSE" command for raw command input since certain commands wouldn't work without a pause.
Channel invitations are available in the linked SmartThings Community topics. Drivers that lack a SmartThings Community topic have not been shared to a publicly-available channel.
Allows simple z-wave devices, such as switches and binary sensors, to act as a different type of device. As an example, a z-wave contact sensor with external contacts that is set up to monitor a smoke detector relay could be reflected in the SmartThings app as a smoke detector.
Driver provides configurable wake-up interval, with settings to determine whether temperature and battery are requested on each wake up.
Configuration options, multi-tap events, and association groups for Jasco-manufactured (GE/Jasco/Honeywell/UltraPro) devices.
Allows various configuration options (e.g. motion sensitivity, operation mode) to be set through automations.
Power and energy reporting, with various configuration options for the dimmer.
Provides full control and configuration of the Intermatic PE653 Pool Control System.
Allows the five PE953 scenes to be used as button presses that can trigger automations. Firmware version of the remote will also be displayed.
Connection to Onkyo and Pioneer AV receivers that support eISCP commands.
Integrations using the SmartThings Node Proxy server developed by redloro.
In development
Driver to connect to a SmartThings Node Proxy server that monitors a chlorine generator.
Connection to Sony Bravia TVs using Simple IP Control.
Adds Run Program/Hold option. The parameter used to change this command appears to be different depending on firmware version.
Zooz drivers developed for my own use and shared in case anyone finds them useful when developing their own. I recommend that end-users install and use the official drivers that have been developed by Zooz, as I will not provide support.
Supports all button scenes except released (ST limitation), supports setting all configuration options and association groups, and exposes indicator light configuration to automations.
Includes options to represent the relay as a switch, smoke detector, carbon monoxide detector, or both smoke and carbon monoxide detector.
Supports the ZSE11 Q Sensor and ZSE40 4-in-1 Sensor.