UNDER CONSTRUCTION
UNDER CONSTRUCTION
UNDER CONSTRUCTION
install/repair: update nvm (CAUTION: removes node + npm) sudo rm -rf ~/.nvm curl https://raw.githubusercontent.com/creationix/nvm/v0.25.0/install.sh | bash nvm --version nvm ls-remote nvm install v9.2.1 node -v npm -v npm install sudo ln -s "$(which node)" /usr/local/bin/node
Pixel clock: ** raspberrypi/firmware#734 vcgencmd hdmi_timings 506 1 8 44 52 264 1 6 10 6 0 0 0 60 0 4000000 1 hdmi_timings=506 1 8 44 52 264 1 6 10 6 0 0 0 60 0 4000000 1 tvservice -e "CEA 4" ; sleep 1; vcgencmd measure_clock pixel ; tvservice -e "DMT 87"; sleep 1; vcgencmd measure_clock pixel According to spec PLLH must be between 600MHz and 2400MHz (but we support up to 3000MHz when overclocking) There is a fixed divide by 10 from the PLL, plus an 8-bit divisor. So we should be able to divide PLL by between 10 and 2550. So highest pixel clock is 240MHz (300MHz with overclock) And lowest pixel clock is 0.235MHz
some examples shown t https://askubuntu.com/questions/147580/how-to-see-change-screen-refresh-rate-or-monitor-frequency ** https://ubuntuforums.org/archive/index.php/t-779038.html
http://www.techmind.org/lcd/phasexplan.html
Node.js tuning: https://blog.jayway.com/2015/04/13/600k-concurrent-websocket-connections-on-aws-using-node-js/
- use Websockets/ws instead of socket.io
- –nouse-idle-notification
- –expose-gc + call gc every ~ 30 sec
Beawares: SHM: tools ipcs, ipcrm, chshm leaves dangling if run as root and then inc size, need to sudo, ipcrm or chshm to adjust shm size
TODO:
- fix npm install (quits, nan absent, requires 2x) https://www.npmjs.com/package/tiny-worker https://wiki.libsdl.org/SDL_GetWindowBordersSize?highlight=%28%5CbCategoryAPI%5Cb%29%7C%28SDLFunctionTemplate%29 https://github.com/projectM-visualizer/projectm https://www.perl.com/pub/2011/01/visualizing-music-with-sdl-and-perl.html https://www.cg.tuwien.ac.at/courses/Seminar/WS2010/processing.pdf https://nodeaddons.com/streaming-data-from-c-to-node-js/ good expl of pre-reqs (g++): https://github.com/chrisemunt/tcp-netx maybe use Docker on a stack of (say, 4) RPis or RPi-Zeros? https://blog.alexellis.io/getting-started-with-docker-on-raspberry-pi/ 16 cores * 0.1 Intel ~= 1.5 Intel CPUs password-less ssh: ssh-keygen cat ~/.ssh/id_rsa.pub | ssh pi@raspberrypi "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" https://blog.codecentric.de/en/2013/03/home-automation-with-angularjs-and-node-js-on-a-raspberry-pi/ RPi cluster? https://makezine.com/projects/build-a-compact-4-node-raspberry-pi-cluster/ LCD front panel: https://www.raspberrypi-spy.co.uk/2012/07/16x2-lcd-module-control-using-python/#prettyPhoto RPi 2/3 SAMBA + cross-over: http://thisdavej.com/connecting-a-raspberry-pi-using-an-ethernet-crossover-cable-and-internet-connection-sharing/ https://raspberrypi.stackexchange.com/questions/37554/local-network-between-two-rpis/37596#37596 http://amzn.to/2chSQ4N http://amzn.to/2cqvjn5 Video core info: https://github.com/hermanhermitage/videocoreiv/wiki/VideoCore-IV-Programmers-Manual
PERF notes: ** https://medium.com/the-node-js-collection/get-ready-a-new-v8-is-coming-node-js-performance-is-changing-46a63d6da4de
- func calls were slow within try/catch
- avoid delete and instead set properties to undefined
- fat arrow functions which do not have arguments objects
- less code != faster code
- expose arguments object to another function instead of converting to array
- bind was slower than closure
- comments used to slow down funcs
- put long numeric ID’s in strings
- use Object.keys for loop, Object.values directly is slower
- monomorphic func args are faster
- remove "debugger" stmts the soc is a GPU with a CPU bolted on as a feature to check version# of components: npm version -OR- node -e 'console.log(process.versions);' 32-bit vs. 64-bit:
- 32 bit more mature?
- 64-bit code is sometimes larger, fewer instructions fit in cache
- 64-bit ptrs take more RAM, cache than 32-bit ptrs; most data they point to isn't, #pointers is a lot lees than overall data. So the memory hit is fairly insignificant. https://groups.google.com/forum/#!topic/nodejs/rAvPzqZ-YY4
- Instructions with immediate values are larger but position independent code tends to be smaller and more efficient due to RIP-relative addressing.
- **more registers so data gets spilled to the stack less often.
- 32-bit system call performance suffers on 64 bit hosts because every system call goes through a thunk that switches modes and converts arguments and the return value.
- Javascript uses 64 bits for its numbers exclusively.
- reuse functions (esp lambas) so optimized versions are used arm7 == 32-bit armv8 = 32/64-bit cat /proc/cpuinfo
node -p "process.config" node -p "process.arch"
flamegraphs node --trace_opt --trace_inlining --trace_deopt file.js
for scripts, remember to edit getcfg.js
sudo apt-get dist-upgrade sudo apt-get update sudo apt-get upgrade RPi firmware: (4.9.69-v7+ as of 12/17/17) sudo rpi-update offline update: https://www.element14.com/community/thread/25357/l/updating-raspberry-pi-without-connecting-to-the-internet?displayFullThread=true https://github.com/raspberrypi/firmware download + extract, move to /boot
find disk usage: https://askubuntu.com/questions/432836/how-can-i-check-disk-space-used-in-a-partition-using-the-terminal-in-ubuntu-12-0/432842 cd /; sudo du -sh ./*
https://www.raspberrypi.org/forums/viewtopic.php?t=44044 lsusb lsmod 8192cu try to load it manually: modprobe 8192cu ifconfig -a wlx... apt-get install sudo vi /etc/NetworkManager/system-connections/SSID-file copy an existing ssid file to correct ssid in /etc/NetworkManager/system-connections; change UUID (must be unique) uuidgen sudo systemctl stop NetworkManager sudo systemctl start NetworkManager sudo ifconfig wlan0 down && sudo ifconfig wlan0 up journalctl -u NetworkManager #https://askubuntu.com/questions/117065/how-do-i-find-out-the-name-of-the-ssid-im-connected-to-from-the-command-line nmcli -t -f active,ssid dev wifi iwgetid iwgetid -r nmcli con show ifconfig
wifi diag: **sudo apt-get dist-upgrade sudo apt-get update sudo apt-get upgrade
sudo /etc/init.d/network-manager start
list largest Ubuntu packages: http://www.commandlinefu.com/commands/view/3842/list-your-largest-installed-packages-on-debianubuntu dpkg-query -Wf '${Installed-Size}\t${Package}\n' | sort -n remove packages: https://www.howtogeek.com/229699/how-to-uninstall-software-using-the-command-line-in-linux/ sudo apt-get --purge remove xyz
RPi /boot/cmdline.txt: dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
friends-gpu-ws281x
Table of Contents
What it does
What it does
How it works
How it works
How to install it
How to install it
How to use it
How to use it
More info
More info
UNDER CONSTRUCTION
UNDER CONSTRUCTION
UNDER CONSTRUCTION
NOTE: if "npm install" fails to install devDependencies, check your Node.js production flag or delete package-lock.json and try again. For more info see https://stackoverflow.com/questions/34700610/npm-install-wont-install-devdependencies
git clone + npm install for dev install npm run rebuild to recompile
npm run postinstall for demos
INITIAL VERSION: not using OpenGL
RPi VGA Pin-out
VGA signals can be redirected to up to 26 GPIO pins as follows:
//"universe" mapping on RPi pins: // [0] = R7 = GPIO27 (GEN2) // [1] = R6 = GPIO26 (absent on GoWhoops board) // [2] = R5 = GPIO25 (GEN6) // [3] = R4 = GPIO24 (GEN5) // [4] = R3 = GPIO23 (GEN4) // [5] = R2 = GPIO22 (GEN3) // [6] = R1 = GPIO21 // [7] = R0 = GPIO20 // [8] = G7 = GPIO19 (PWM) // [9] = G6 = GPIO18 (GEN1) // [10] = G5 = GPIO17 (GEN0) // [11] = G4 = GPIO16 // [12] = G3 = GPIO15 (RXD0) // [13] = G2 = GPIO14 (TXD0) // [14] = G1 = GPIO13 (PWM) // [15] = G0 = GPIO12 (PWM) // [16] = B7 = GPIO11 (SPI_CLK) // [17] = B6 = GPIO10 (SPI_MOSI) // [18] = B5 = GPIO09 (SPI_MISO) // [19] = B4 = GPIO08 (SPI_CE0_N) // [20] = B3 = GPIO07 (SPI_CE1_N) // [21] = B2 = GPIO06 // [22] = B1 = GPIO05 // [23] = B0 = GPIO04 (GPIO_GCLK) //--------------------------------- // H SYNC = GPIO03 (SCL1, I2C) // V SYNC = GPIO02 (SDA1, I2C) // DE = ID_SD (I2C ID EEPROM) // PXCLK = ID_SC (I2C ID EEPROM)
There are existing device tree overlays to redirect 16, 18, or 24 VGA signals to the RPi GPIO pins: //dpi24 or vga565/666 send video to GPIO pins var dpi24 = glob.sync("/sys/firmware/devicetree/base/soc/gpio*/dpi24*") || []; if (dpi24.length) return toGPIO.cached = 8+8+8; var vga666 = glob.sync("/sys/firmware/devicetree/base/soc/gpio*/vga666*") || []; if (vga666.length) return toGPIO.cached = 6+6+6; var vga565 = glob.sync("/sys/firmware/devicetree/base/soc/gpio*/vga565*") || []; if (vga565.length) return toGPIO.cached = 5+6+5;
FriendsWithGpu-WS281X
Test/sample programs using RPi GPU to control WS281X pixels tree:
Dependencies:
on RPi, libpng-dev <- libslang2-dev <- libcaca-dev <- libsdl1.2-dev TODO: see Makefile at https://github.com/mattgodbolt/compiler-explorer/blob/master/Makefile for devDependencies: npm install --dev
other info
NOTE: if you get a message like: "was compiled against a different Node.js version using NODE_MODULE_VERSION ##. This version of Node.js requires NODE_MODULE_VERSION ##. ", then delete node_modules and do npm install again to rebuild.
2 use cases implemented:
- dev PC (Ubuntu) with X Windows
- prod RPi (Ubuntu) without X Windows
2 operation modes implemented:
- CPU-generated graphics, GPU only adds WS281X timing
- CPU provides timing sync only, GPU generates graphics effects
3 display modes:
- dev: show pixels on screen in matrix
- prod: generate real WS281X timing and control signals
- debug: prod mode + timing debug on screen
GLX extension not found: SOMETHING BELOW HELPED: cat /var/log/Xorg.0.log | grep glx glxinfo | grep "OpenGL renderer" sudo apt-get update sudo apt-get sudo apt-get check sudo add-apt-repository ppa:ubuntu-x-swat/updates sudo apt update && sudo apt dist-upgrade sudo add-apt-repository multiverse sudo apt-get install steam sudo dpkg --add-architecture i386 sudo apt-get update sudo apt-get install wget gdebi libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libc6:i386 steam sudo apt-get install mesa-utils sudo apt autoremove
https://unix.stackexchange.com/questions/254377/xlib-extension-glx-missing-with-an-nvidia-card-and-on-board-graphics cat /var/log/Xorg.0.log | grep glx glxinfo | grep "OpenGL renderer" https://forum.manjaro.org/t/solved-opengl-glx-extension-not-supported-by-display/18615/2 lspci -nnnk | grep "VGA|'Kern'|3D|Display" -A2 inxi -F
http://www.omgubuntu.co.uk/2017/03/easy-way-install-mesa-17-0-2-ubuntu-16-04-lts sudo add-apt-repository ppa:ubuntu-x-swat/updates sudo apt update && sudo apt dist-upgrade #sudo ppa-purge ppa:ubuntu-x-swat/updates
https://linuxconfig.org/how-to-install-steam-on-ubuntu-16-04-xenial-xerus
SDL2 on Ubuntu 16.04: https://stackoverflow.com/questions/44758276/build-error-for-sdl2-2-0-5-in-ubuntu-16-04 ./configure --enable-mir-shared=no make all #or make -j4 sudo make install puts them at /usr/local/include/SDL2 and /usr/lib