Si4463 pin | ESP32 pin |
---|---|
nSEL | IO10/SPI_CS |
SCK | IO12/SPI_CLK |
MISO | IO13/SPI_Q |
MOSI | IO11/SPI_D |
SDN | IO01 |
IRQ | IO02 |
GPIO_0 | IO16 (direct mode/clk) |
GPIO_1 | IO03 (direct mode/data) |
- pio run --target=upload
- pio device monitor -b 115200
Command | Function |
---|---|
P | -> Powercycle |
Fnnn.nn | -> Set RX Frequency (active after next "run" command) |
C | -> Send WDS config to Si4463 |
R | -> Run (START_RX) |
S | -> Stop (+print statistics) |
Vxx | -> Verbosity (bitmask, hex) x=00..ff, vK color on, vk color off |