dndx/phantun

Issues

• 两台机器之间只能建立一个phantun连接

  #154 opened 2 months ago by 1887656
  0

• how to set up phantun on debian12 correctly?

  #153 opened 2 months ago by linnuxx
  0

• the command is not working

  #152 opened 2 months ago by linnuxx
  0

• tuntap doesn't support multiqueue on kernel < 3.8

  #143 opened 2 months ago by Jimmy-Z
  0

• Cannot work with udpspeeder

  #148 opened 2 months ago by zorgro
  3

• optimization proposal

  #144 opened 2 months ago by Jimmy-Z
  2

• WireGuard, Phantun, and iptables NAT Comprehensive Test Results and Conclusions:

  #145 opened 2 months ago by maojianyou
  1

• Can other operating systems be supported?

  #146 opened 2 months ago by aagaguai
  1

• How to use wireguard+phantun correctly in openwrt

  #116 opened a year ago by lfznnzq
  12

• thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: EPERM'

  #149 opened 4 months ago by gonewind73
  1

• Occasionally disconnected after being connected for a few days

  #147 opened 4 months ago by resticDOG
  2

• Inquiry on Sequence Number Check for SYN Packets in fake-tcp/src/lib.rs

  #142 opened 6 months ago by luhengsw
  3

• The throughput of phantun is only half that of udp2raw

  #141 opened 6 months ago by haohetao
  5

• The port has startup logs but hasn't actually started.

  #137 opened 7 months ago by ly-druid
  5

• can't run multiple instance

  #140 opened 7 months ago by haohetao
  1

• Unable to connect to remote

  #114 opened a year ago by faritor
  5

• Unable to connect (tcpdump result attached)

  #120 opened a year ago by terrytw
  3

• Adding Cargo.lock

  #138 opened 8 months ago by poscat0x04
  0

• 0.6 crashes, but 0.5 works with the same config.

  #125 opened 8 months ago by Jimmy-Z
  2

• block by ChinaMobile Shanghai

  #130 opened 8 months ago by YaoFei509
  1

• Wireguard openwrt https error

  #127 opened 9 months ago by 0x00111
  2

• How to run multiple phantun_server instances in same machine ?

  #126 opened 9 months ago by toplinuxsir
  1

• FreeBSD OPNsense The published binary files do not support opening

  #123 opened 9 months ago by 0x00111
  1

• about remote mode

  #115 opened 9 months ago by reusu
  1

• Unable to establish Wireguard connection on OpenWRT running OpenClash(meta core)

  #135 opened 9 months ago by resticDOG
  1

• wireguard can not route 0.0.0.0/0

  #119 opened a year ago by RainCrowSP
  12

• [question] How can I use phantun on wireguard full mesh network?

  #113 opened a year ago by STASWIT
  2

• Questions about the use of router openwrt

  #111 opened a year ago by thisdk
  2

• phantun version0.5

  #110 opened a year ago by senkiss
  3

• [Feature Request] Log output time

  #101 opened a year ago by pexcn
  0

• [Feature Request] make phantun tunnel transparent

  #112 opened a year ago by Popwax
  1

• Could I specify a network interface for tun0/phantun?

  #106 opened a year ago by lanyuue
  1

• Bad TCP SYN packet from xx-ip:22237, sending RST

  #104 opened a year ago by xiaolei0125
  1

• windows support ?

  #102 opened a year ago by toplinuxsir
  2

• waiting for client ACK timeout ?

  #105 opened a year ago by toplinuxsir
  1

• 不能很好地防止运营商 QoS

  #109 opened a year ago by pexcn
  2

• Openwrt support?

  #107 opened a year ago by wuyifan66
  1

• Run phantun in the Android

  #99 opened a year ago by zyf0330
  1

• Unable to connect using IPV6 in phantun 0.6.0

  #98 opened a year ago by address-list
  1

• Wireguard through Phantun,peers see each orther,but no internet sharing.

  #94 opened a year ago by Kjwj
  2

• OpenWrt 22.03.03 X86_64 Phantun is Not working

  #96 opened a year ago by address-list
  1

• Not compatible with LotServer (aka. 锐速)

  #95 opened a year ago by pexcn
  2

• Building phantun in FreeBSD failed

  #90 opened 2 years ago by hshh
  1

• [Feature Request] Detail Logs

  #88 opened 2 years ago by Handsome1080P
  2

• [Feature Request]Anti-Relay

  #83 opened 2 years ago by Handsome1080P
  2

• 连接几个小时后卡死，需要增加类似udp2raw的在线重连机制

  #87 opened 2 years ago by YaoFei509
  1

• phantun_aarch64-unknown-linux-musl-v0.6.0 Run an error on OpenWRT

  #86 opened 2 years ago by CTCD
  5

• Excuse me?Is this software feasible in dynamic IPv6 network?

  #84 opened 2 years ago by yzazzx2021
  2

• Using TcpListener and UdpSocket instead of tokio_tun

  #85 opened 2 years ago by hameda169
  1

• Windows client is supported?

  #82 opened 2 years ago by suweide
  2