Fork of SmartThings add-on
This is a fork of @thewilliambond SmartThings add-on, which is a fork of the original Hass.io add-on for the wonderful SmartThings MQTT Bridge -- https://github.com/stjohnjohnson/smartthings-mqtt-bridge
This Hass.io add-on updates the config.json file to add the arch values missing. Without it, the add-on will not run due to this error:
19-06-23 15:39:45 WARNING (MainThread) [hassio.store.data] Can't read /data/addons/git/66f0e245/smartthings/config.json: required key not provided @ data['arch']. Got None
I updated config.json so this repository should be supported in Home Assistant.
This is a fork from the Plex add-on has a small change in the plex.sh file to add the following commands:
set -e
if [[ ! -e /share/hdd ]]; then
mkdir -p /share/hdd
chmod -R 0777 /share/hdd
fi
if [[ -e /dev/sda1 ]]; then
mount /dev/sda1 /share/hdd
fi
Changes to config.json:
"map": ["config:rw", "ssl:rw", "addons:rw", "share:rw", "backup:rw"],
"devices": ["/dev/sda1:/dev/sda1:rwm"],
"full_access": true
Protection Mode must be disabled.
These commands will mount the first USB flash drive connected to your Raspberry Pi or whatever device you're running Hassio on. You should be able to access the USB drive in Plex by navigating to the /media directory. I don't update this add-on, but it is easy to replicate on the latest version of @frenck Plex add-on.
This add-on was missing the arch values in config.json, and also the HASS-Sensor Magic Mirror add-on was causing issues due to not using the Hassio token. I removed those add-ons for now until I find the solution.
This is a fork of @popsodav's fork of Samba add-on that added automatic mounting of /dev/sda1 to the /hassio/share directory. I used the same code on the Plex fork.