The aim of the project is plotting the height anomaly values with contour lines on planet Mars also specially around Perseverance rover, Mount Olympus with MATLAB.
- Mission Name: Mars 2020
- Rover Name: Perseverance
- Main Job: Seek signs of ancient life and collect samples of rock and regolith (broken rock and soil) for possible return to Earth.
- Launch: July 30, 2020
- Landing: Feb. 18, 2021, Jezero Crater, Mars
The rover's coordinates may vary from time to time. If you want to change the coordinate values, you can replace the values in the mars_height_anomaly_ell_Perseverance.m file with the values on the mars.nasa.gov website.
The datasets available for the study were created through the .gdf files on the ICGEM website and partially based on the parameters shown below.
long_lat_unit degree
latlimit_north 40.140000000000
latlimit_south 3.1400000000000
longlimit_west 204.19000000000
longlimit_east 244.19000000000
gridstep 1.0000000000000
height_over_ell 0.0000 m
functional height_anomaly_ell
modelname ggm1025a
maxvalue 3.2624243E+02 meter
minvalue 2.8925281E+02 meter
If you want to plot 3D of contour map, please type these on command window:
surf(X, Y, Z);
xlabel('Longitude');
ylabel('Latitude');
zlabel('m');
long_lat_unit degree
latlimit_north 19.060000000000
latlimit_south 17.760000000000
longlimit_west 76.870000000000
longlimit_east 78.170000000000
gridstep 0.10000000000000
height_over_ell 0.0000 m
functional height_anomaly_ell
modelname ggm1025a
maxvalue 3.2624243E+02 meter
minvalue 2.8925281E+02 meter
If you want to plot 3D of contour map, please type these on command window:
surf(X, Y, Z);
xlabel('Longitude');
ylabel('Latitude');
zlabel('m');
long_lat_unit degree
latlimit_north 90.000000000000
latlimit_south -90.000000000000
longlimit_west -179.00000000000
longlimit_east 179.00000000000
gridstep 1.0000000000000
height_over_ell 0.0000 m
functional height_anomaly_ell
modelname ggm1025a
maxvalue 1.7952732E+03 meter
minvalue -7.5576053E+02 meter
If you want to plot 3D of contour map, please type these on command window:
surf(X, Y, Z);
xlabel('Longitude');
ylabel('Latitude');
zlabel('m');
Please review the .gdf files for more detailed information.
Please take a look at these links if you want to know what is height anomaly.
If you have something to say to me please contact me:
- Twitter: Doguilmak
- Mail address: doguilmak@gmail.com