Purpose
This git repository can be used to setup and configure a Raspberry Pi as a humidity and temperature logger.
Requirements
- a Raspberry Pi (of course)
- an SD card with Raspbian installed on it
- one or more DHT11, DHT22 or AM2302 temperature and humidity sensors
Installation
Update Raspbian
First of all, make sure your Raspbian is up to date:
sudo apt-get update && sudo apt-get -y upgrade
Install RPi Humidity Logger
curl https://raw.githubusercontent.com/domibarton/rpi-humidity-logger/develop/setup.sh | bash
Configuration
Please have a look at the configuration file at app/config.py.
By default the collector is configured for a DHT11 on GPIO PIN 2. It will poll the sensor in a 5 minute interval.
Usage
You should be able to connect to the Raspberry Pi via HTTP (port 80).
If you've configured your RPi 3 as access point via setup script, then you should see the SSID "RPiHumidityLogger" with a default WPA passphrase "humidity".
License
The MIT License (MIT)