dominikamann/oekofen-pellematic-compact

Issues

• Is it possible to add the actual warm water temperature?

  #89 opened 7 days ago by laugrean
  1

• Add "Ash amount" sensor ?

  #86 opened 18 days ago by cperrier
  1

• Aucunes données

  #83 opened 18 days ago by froumizen
  12

• Power - offtemp should be controllable

  #84 opened 18 days ago by paulbusse
  1

• "Pellematic Power - Total" remains unknown

  #85 opened 18 days ago by paulbusse
  4

• No data

  #52 opened 6 months ago by BobMoran88
  3

• Any possibility to set pellematic_heating_circuit_1_flow_temperature_heat and pellematic_heating_circuit_1_temperature_setback?

  #80 opened 23 days ago by cperrier
  2

• DIsplay problem with status messages that include non-ASCII characters

  #78 opened a month ago by cperrier
  11

• No second heating circuit

  #57 opened a month ago by snuff0815
  7

• Sensoren "Unbekannt"

  #70 opened a month ago by Friesii89
  1

• Fehlende Werte

  #66 opened a month ago by gmbh07
  3

• Pump state always "on"

  #69 opened 2 months ago by Ultchad
  4

• Status Solar circuit wrong / Pump status Solar & Buffer storage in %

  #58 opened 4 months ago by WahlFisch91
  11

• Pellet Usage Unknown

  #61 opened 4 months ago by thomas1235678
  4

• How to find out the pellematic software version

  #60 opened 4 months ago by level420
  6

• Problem with French accented characters

  #49 opened 6 months ago by Disciplus86
  3

• The last version of HA [2024.1.6] not work with pellematic

  #44 opened 10 months ago by Disciplus86
  4

• Pump state always "on"

  #34 opened 10 months ago by Realafr
  9

• Stirling

  #40 opened 10 months ago by schu-r
  1

• pellematic Pellet 1 Usage Today - always 0

  #37 opened a year ago by wtedeschi
  5

• energy dashboard

  #35 opened a year ago by lucaferrucci
  1

• Total pellet usage and total kWh for Energy dashboard

  #31 opened a year ago by realthargor
  0

• Sensors are not prefixed with the entered prefix during setup

  #21 opened a year ago by cnico
  7

• Pellet numbering is broken

  #30 opened a year ago by MrRagga-
  1

• Add an option to implement SmartPV values to the initial config

  #25 opened 2 years ago by EnerGeh
  1

• Integration does not work anymore after compact update to 4.02

  #17 opened 2 years ago by lucaferrucci
  19

• Sensor for L_ontemp_act = Hot water circuit actual temp missing

  #16 opened 2 years ago by RalfPfitzner
  4

• Values appear with factor 10x

  #11 opened 2 years ago by Jens314
  11

• 🚀 Release 2.0.0 is available

  #10 opened 2 years ago by lucaferrucci
  4

• Third heating circuit not listed

  #7 opened 2 years ago by loicguiraud
  0

• oekofen-pellematic-compact

  #1 opened 2 years ago by lucaferrucci
  10