Install

pip3 install -U git+https://github.com/dominikandreas/modtpy.git

Usage

$ modtpy
Usage: modtpy [OPTIONS] COMMAND [ARGS]...

Options:
  -l, --debug / --no-debug
  --help                    Show this message and exit.

Commands:
  enter-dfu
  flash-firmware
  load-filament
  send-gcode
  status
  unload-filament
  
$ modtpy send-gcode --help
Usage: modtpy send-gcode [OPTIONS] GCODE_PATH

Options:
  --help  Show this message and exit.

Rest of Readme copied from https://github.com/tripflex/MOD-t/tree/master/scripts

MOD-t Scripts

Original source from https://github.com/Xaero252/Mod-T-Scripts

First and foremost:

USE THESE SCRIPTS AT YOUR OWN RISK! These scripts aren't very well tested and almost none of them are completely finished. They work to interface with the printer but it's all very manual.

Overview and license

This is a basic set of utility scripts to interface with the New Matter Mod-T 3d printer on Linux. You are free to fork and contribute as you see fit. This work falls under the MIT license. See the LICENSE file for more information. I must also credit /u/modtdev on reddit for the work on getting the gcode sent to the Mod-T

Depdencies

curl
*dfu-util
*python3
*python3-pyusb

Usage

First, I recommend creating a udev rule for the Mod-T similar to the following: /etc/udev/rules.d/51-modt.rules: SUBSYSTEM=="usb", ATTR{idVendor}=="2b75", ATTR{idProduct}=="0002", GROUP="users", MODE="0674" SUBSYSTEM=="usb", ATTR{idVendor}=="2b75", ATTR{idProduct}=="0003", GROUP="users", MODE=0674"

In the above I have everyone in the users group enabled, however you can restrict access as needed. This allows a regular user to run the scripts and still have them operate as intended.

From there most scripts are pretty straightforward. Simply flag them executable and run them. The send_gcode.py, flash_firmware.sh, and fw_update.py are the only scripts requiring arguments, each of them expect a single argument containing the path to an appropriate file for the function requested.

If you do choose to use these scripts to print things by sending gcode, monitor the output of the send_gcode.py script until you see STATE_JOB_QUEUED as the printer status. If you press the front panel button prior to seeing this state you will have a broken print job, which will not print correctly.