.Net Standard library to retrieve statistics from a TP-Link Easy Smart network switch
This library allows to retrieve (and reset) packet statistics from the Gigabit Switch TL-SG108E by some sort of Web-Scraping. This can be used for automatically monitoring if bad packets occur in your Ethernet network.
NEW: QoS / Bandwith Control => GetPortSpeeds() SetPortSpeeds(IngressRate, EgressRate) (thanks to @EXTREMEGABEL)
It might also work with the following models:
- TL-SG105E
- TL-SG108PE
- TL-SG1016DE
- TL-SG1024DE
Port# Status Link Status TxGoodPkt TxBadPkt RxGoodPkt RxBadPkt
1 Enabled Link Down 11070981 0 68130043 0
2 Enabled Link Down 0 0 0 0
3 Enabled 1000Full 724438820 0 2992039137 4
4 Enabled Link Down 1429570820 0 208170962 0
5 Enabled Link Down 3566691176 0 1834219074 0
6 Enabled 1000Full 2406747707 0 2885793038 0
7 Enabled Link Down 19260977 0 49242424 0
8 Enabled 1000Full 164910192 0 267304382 77
There is a more comprehensive project on GitHub which uses the native protocol of the switches, but it is written in Python: https://github.com/pklaus/smrt
