This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org edit: clone the reposotory with "git clone https://github.com/donkey42/openwrt.git" then checkout the branch required "git checkout <required branch>" for attitude_adjustment "git checkout attitude_adjustment" for barrier_breaker "git checkout barrier_breaker" for chaos_calmer "git checkout chaos_calmer or just do one git clone command for attitude_adjustment "git clone -b attitude_ajustment https://github.com/donkey42/openert.git" for barrier_breaker "git clone -b barrier_breaker https://github.com/donkey42/openert.git" for chaos_calmer "git clone -b chaos_calmer https://github.com/donkey42/openert.git" donkey