A quick tool for listening to Dyson devices over MQTT
If you happen to have Go installed, you can just use it to install.
go install github.com/dotvezz/dyson-mqtt-listen/cmd/dyson-mqtt-listen@latestYou can download the executable binary file for your platform in this repository's releases.
Once you've downloaded or installed the binary, run it with the correct flags for your device.
Use the flag -address (The IP address of your device on your network), with -ssid, and -wifi-password using values from your sticker.
Use the flag -address with -serial, -password, and -device. Use the get_devices.py script in libdyson-neon to find the correct values.
# if you used `go install`
dyson-mqtt-listen -address "192.168.1.207" -ssid "DYSON-NM7-US-REA2128R-475" -wifi-password "zxcvasdf"
# if you downloaded the linux binary
chmod +r ./dyson-mqtt-listen
./dyson-mqtt-listen -address "192.168.1.207" -ssid "DYSON-NM7-US-REA2128R-475" -wifi-password "zxcvasdf"
# if you downloaded the macOS binary
chmod +r ./dyson-mqtt-listen-darwin
./dyson-mqtt-listen -address "192.168.1.207" -ssid "DYSON-NM7-US-REA2128R-475" -wifi-password "zxcvasdf"
# if you downloaded the Windows binary
dyson-mqtt-listen.exe -address "192.168.1.207" -ssid "DYSON-NM7-US-REA2128R-475" -wifi-password "zxcvasdf" Let it run for a few minutes. Hopefully you see something like the following:
00:46:35: Connected to device...
00:46:35: Subscribed to 475/NM7-US-REA2128R/status/current
00:46:35: Subscribed to 475/NM7-US-REA2128R/command
00:46:35: Press Ctrl+C to exit.
00:46:49|475/NM7-US-REA2128R/status/current: {"msg":"ENVIRONMENTAL-CURRENT-SENSOR-DATA","time":"2023-06-18T04:46:50.000Z","data":{"tact":"2930","hact":"0062","pact":"0004","vact":"0000","sltm":"OFF"}}
00:47:19|475/NM7-US-REA2128R/status/current: {"msg":"ENVIRONMENTAL-CURRENT-SENSOR-DATA","time":"2023-06-18T04:47:20.000Z","data":{"tact":"2930","hact":"0062","pact":"0004","vact":"0000","sltm":"OFF"}}