/TinyECC

A modified version of TinyECC, a public key crypto library for TinyOS

Primary LanguageCOtherNOASSERTION

README for TinyECC Version 2.0 Modified: Fergus Leahy, 2014 Author/Contact: An Liu, liuan79@gmail.com

Introduction

TinyECC is a software package providing ECC-based PKC operations that can be flexibly configured and integrated into sensor network applications. It provides a digital signature scheme (ECDSA), a key exchange protocol (ECDH), and a public key encryption scheme (ECIES). It provides a number of optimization switches, which can turn specific optimizations on or off based on developer's needs.

TinyECC 2.0 supports MICA2/MICAz, TelosB/Tmote Sky, BSNV3, and Imote2 motes. It supports SECG recommended 128-bit, 160-bit and 192-bit elliptic curve domain parameters.

Update

Added the ability to save the state of ECC and ECDSA when changing between keys, thus saving the initilisation times when repeatedly switching. Also modified some return values, see commits

How to install

  1. Install TinyOS 2.1.1 or later version. http://docs.tinyos.net/index.php/Getting_started

  2. Extract TinyECC-2.0.zip to directory /opt/tinyos-2.1.1/apps/TinyECC-2.0.

Interfaces provided

  1. NN.nc defines the interface NN, which provides big natural number operations. Read NN.nc for more details. NNM.nc implements this interface.

  2. ECC.nc defines the interface ECC, which provides the basic elliptic curve operations and enhanced elliptic curve operations based on sliding window method and projective coordinate system. ECCM.nc implements this interface.

  3. ECDSA.nc defines the interface ECDSA, which provides the ECDSA signature generation and verification. Read ECDSA.nc for more details. ECDSAM.nc implements this interface.

  4. ECIES.nc defines the inerface ECIES, which provides the ECIES encryption and decryption. ECIESM.nc implements this interface.

  5. ECDH.nc defines the interface ECDH, which provides the ECDH key establishment. ECDHM.nc implements this interface.

  6. SHA1.nc defines the interface SHA1, which provides the SHA-1 functions. SHA1M.nc implements this interface.

  7. CurveParam.nc defines the interface CurveParam, which provides one function to get the parameters of elliptic curves and another function for optimized multiplication with omega. secp128*.nc, secp160*.nc, secp192*.nc implement this interface to provide parameters for SECG defined elliptic curves. You only need to define curve name in your makefile to select the elliptic curve parameters.

Examples

*** Example 1: ECDSA ***

testECDSA.nc and testECDSAM.nc are used to measure the execution time of ECDSA in TinyECC.

Use the following steps to run this example. Assume you are using MICAz, mib510 Programming and Serial Interface Board, which is connected to USB through a Serial to USB cable.

  1. Program node, and then leave the node on the programming board.

make micaz install mib510,/dev/ttyUSB0

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:micaz &

  1. Run show_ecdsa in your TinyECC directory.

java show_ecdsa

If you are using TelosB/Tmote Sky, take the following steps.

  1. Plug TelosB into USB port.

make telosb install

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:telosb &

  1. in your TinyECC directory.

java show_ecdsa

If you are using Imote2, take the following steps.

  1. Plug debug board into USB port and attach an imote2 to the board. Suppose that the USB maps to 2 ports, the second one is /dev/ttyUSB2.

make intelmote2 install openocd

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB2:intelmote2 &

  1. Run show_ecdsa

java show_ecdsa

*** Example 2: ECIES ***

testECIES.nc and testECIESM.nc are used to measure the execution time of ECIES in TinyECC.

Use the following steps to run this example. Assume you are using MICAz, mib510 Programming and Serial Interface Board, which is connected USB port through a Serial to USB cable.

  1. Program node, and then leave the node on the programming board.

make -f makefile_ECIES micaz install mib510,/dev/ttyUSB0

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:micaz &

  1. Run show_ecdsa in your TinyECC directory.

java show_ecies

If you are using TelosB/Tmote Sky, take the following steps.

  1. Plug TelosB into USB port.

make -f makefile_ECIES telosb install

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:telosb &

  1. in your TinyECC directory.

java show_ecies

If you are using Imote2, take the following steps.

  1. Plug debug board into USB port and attach an imote2 to the board. Suppose that the USB maps to 2 ports, the second one is /dev/ttyUSB2.

make -f makefile_ECIES intelmote2 install openocd

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB2:intelmote2 &

  1. Run show_ecdsa

java show_ecies

*** Example 3: ECDH ***

testECDH.nc and testECDHM.nc are used to measure the execution time of ECDH in TinyECC.

Use the following steps to run this example. Assume you are using MICAz, mib510 Programming and Serial Interface Board, which is connected to USB port through a Serial to USB cable.

  1. Program node, and then leave the node on the programming board.

make -f makefile_ECDH micaz install mib510,/dev/ttyUSB0

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:micaz &

  1. Run show_ecdsa in your TinyECC directory.

java show_ecdh

If you are using TelosB/Tmote Sky, take the following steps.

  1. Plug TelosB into USB port.

make -f makefile_ECDH telosb install

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:telosb &

  1. in your TinyECC directory.

java show_ecdh

If you are using Imote2, take the following steps.

  1. Plug debug board into USB port and attach an imote2 to the board. Suppose that the USB maps to 2 ports, the second one is /dev/ttyUSB2.

make -f makefile_ECDH intelmote2 install openocd

  1. Run SerialForwarder.

java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB2:intelmote2 &

  1. Run show_ecdsa

java show_ecdh

Inline Assembly Code

There are some inline assembly code in NNM.nc to speed up natural number operations. The inline assembly code is written for Atmega128l(MICAz), MSP430(TelosB/Tmote Sky), and XScale(Imote2). If you want to use TinyECC for other platforms, you must comment "#define INLINE_ASM" in NN.h or implement your own inline assembly code.

Acknowledgement

NNM.nc is based on the natural number operations in RSAREF2.0.