- Information does not appear until select a task in the 'Process Menu'
- TerminalContentBox needs to be changet to cover all escape chars
- Erase Functions
- ESCc: clear screen and move cursor to 0x0
- ESC[0J: clears from cursor until end of screen
- was done, but in a wrong way, it is erasing the entire screen and turning the cursor to 0x0
- ESC[1J: clears from cursor to beginning of screen
- ESC[2J: clears entire screen
- ESC[K: clears the current line
- ESC[0K: clears from cursor to end of line
- ESC[1K: clears from cursor to start of line
- ESC[2K: clears entire line
- Cursor Controls
- ESC[H: moves cursor to home position (0, 0)
- ESC[{line};{column}H: moves cursor to line #, column #
- ESC[{line};{column}f: moves cursor to line #, column #
- ESC[#A: moves cursor up # lines
- ESC[#B: moves cursor down # lines
- ESC[#C: moves cursor right # columns
- ESC[#D: moves cursor left # columns
- ESC[#E: moves cursor to beginning of next line, # lines down
- ESC[#F: moves cursor to beginning of previous line, # lines down
- ESC[#G: moves cursor to column #
- ESC[6n: request cursor position (reports as ESC[#;#R)
- ESC[s: save cursor position
- ESC[u: restores the cursor to the last saved position
- Colors / Graphics Mode
- ESC[{...}m: Set graphics mode for cell and onward.
- ESC[0m: reset all modes (styles and colors
- ESC[1m: set bold mode.
- ESC[2m: set dim/faint mode.
- ESC[3m: set italic mode.
- ESC[4m: set underline mode.
- ESC[5m: set blinking mode
- ESC[7m: set inverse/reverse mode
- ESC[8m: set invisible mode
- ESC[9m: set strikethrough mode.
- Reference: ANSI Escape Sequences
- Erase Functions