dron0gus/wideband

Issues

• DENSO 2345726

  #20 opened 5 months ago by rusefillc
  0

• NTK 55214916

  #19 opened 6 months ago by rusefillc
  2

• Dual WB TS CRC check error

  #14 opened a year ago by Zazins
  2

• dual rev1 with only one sensor

  #6 opened 10 months ago by rusefillc
  2

• dual should not be taking voltage info from CAN bus

  #12 opened 10 months ago by rusefillc
  2

• Heater: do not fall into Fault::SensorNoHeatSupply so fast

  #3 opened 10 months ago by dron0gus
  2

• Heater: switch to HeaterState::ClosedLoop from Preheat or WarmupRamp

  #4 opened 10 months ago by dron0gus
  2

• Dual WB ECU tool not working correctly

  #13 opened 10 months ago by Zazins
  1

• afr config is overwritten by egt config

  #16 opened 10 months ago by D0kRay
  1

• Only CAN Message with 0x192

  #15 opened 10 months ago by D0kRay
  2

• overheat logs - same HW different FW

  #11 opened a year ago by rusefillc
  0

• Upstream merge log

  #10 opened a year ago by rusefillc
  4

• bench test data: heater turned off? slow re-warm-up?

  #9 opened a year ago by rusefillc
  0

• overheat huh?

  #8 opened a year ago by rusefillc
  0

• Dr1: something is unstable with sensor0?

  #7 opened 2 years ago by rusefillc
  2

• HW: add cap and diode to stm32 vbat input

  #5 opened 2 years ago by dron0gus
  0

• TS: report effective heater voltage

  #2 opened 2 years ago by dron0gus
  1