dschanoeh/socketcand

Issues

• socketcand not connecting to socketCAN

  #15 opened 8 years ago by bdegner3210
  6

• When I excecuted socketcand, it was an error "bind: Cannot assign requested address".

  #30 opened 3 years ago by ikuyas
  0

• CAN FD support

  #29 opened 5 years ago by mocle
  0

• warning: ‘sigset’ may be used uninitialized in this function [-Wmaybe-uninitialized]

  #16 opened 7 years ago by akast
  2

• Error in beacon send()

  #10 opened 10 years ago by sproutman
  8

• make: error: Compilation error in ARM processor

  #24 opened 6 years ago by GajalakshmiSenthil
  3

• Unauthorized BUS

  #25 opened 6 years ago by SylvainAssemat
  2

• configure: error: C compiler cannot create executables

  #23 opened 6 years ago by ovwok
  2

• Trying to use cannelloni as "socketcancl" (socketcan client), while on other side there is socketcand?

  #22 opened 6 years ago by ZoranStojsavljevic
  0

• [YOCTO BBB] nc: can't connect to remote host (127.0.0.1): Connection refused

  #21 opened 6 years ago by ZoranStojsavljevic
  1

• do_configure for socketcand package failed

  #20 opened 6 years ago by ZoranStojsavljevic
  2

• configure error

  #19 opened 6 years ago by suzixin
  1

• TCP connection failed.

  #18 opened 7 years ago by gaubuali
  1

• Help output not useful

  #17 opened 7 years ago by anthonygclark
  2

• write: No buffer space available

  #14 opened 8 years ago by kacetjan
  0

• ENOBUFS handling

  #8 opened 11 years ago by yegorich
  0

• Bus aliases

  #3 opened 13 years ago by dschanoeh
  0

• No closing > during frame delivery in BCM mode

  #1 opened 14 years ago by dschanoeh
  0

• update protocol.md and add state diagram

  #2 opened 13 years ago by dschanoeh
  0