duinoWitchery/hd44780

Issues

• Question: Arduino gets freezed if an Interrupt is attached

  #47 opened 3 months ago by swimm3r
  1

• I2Cexp_BOARD_SUNROM does not care about begin's cols

  #43 opened 3 months ago by swimm3r
  2

• Question: unexpected behavior multiplexing 1602 LCD backpacks with a PCA9546 multiplexer (Adafruit)

  #46 opened 4 months ago by shaunhurley
  2

• Is this compatible with 1602 screens?

  #45 opened 5 months ago by Hiallthejetbrains
  3

• Send Function settings to the LCD

  #44 opened 6 months ago by timgray
  3

• Impossible to use on ESP32-C3?

  #42 opened a year ago by MassiPi
  0

• Arduino Uno R4 Issues/Status

  #41 opened a year ago by mjs513
  8

• Arduino Nano 168: Sketch uses 106% of program storage space

  #40 opened a year ago by boomsya
  2

• Blocking other loop activities while printing on screen

  #16 opened 2 years ago by federico77
  9

• status -4 for even a most simple sketch?

  #39 opened 2 years ago by StefanL38
  2

• LCD4004A Support

  #38 opened 2 years ago by gmitch64
  1

• Wokwi support

  #35 opened 2 years ago by urish
  21

• Can I use another Arduino2 to read the data sent by Arduino1 to the LCD screen?

  #34 opened 2 years ago by acewei
  4

• plain simple bare minimum democode

  #33 opened 2 years ago by StefanL38
  2

• choose different SDA and SCL pins?

  #32 opened 3 years ago by Irgendwer008
  3

• support for alternate or multiple i2c buses

  #30 opened 3 years ago by bperrybap
  2

• Would this library work with a HD4074608 driven LCD?

  #31 opened 3 years ago by dyllen
  2

• Can't compile for Digispark

  #21 opened 4 years ago by Barabba11
  8

• LCD garble after a while on ATTINY1614

  #20 opened 4 years ago by mart-jakobson
  4

• I want to use it on a raspberry pi

  #22 opened 3 years ago by 9acca9
  3

• Requesting more stable initialisation routine for OLED

  #23 opened 4 years ago by jazzyjoepass
  3

• LCD "Busy"

  #26 opened 3 years ago by OutlawzHD
  4

• Using hd4470 library with the Arduino DUE's second I2C port (SDA1/SCL1)

  #29 opened 3 years ago by mowmow65
  3

• LCD is "Busy"

  #27 opened 4 years ago by OutlawzHD
  0

• Scrolling Veristically from bottom to Top

  #25 opened 4 years ago by chakahamilton
  6

• redefinition of 'hd44780_I2Clcd lcd'

  #24 opened 4 years ago by chakahamilton
  4

• 4 bit mode stability?

  #19 opened 4 years ago by gitterman
  9

• Typos in readme

  #18 opened 4 years ago by HendrikVE
  2

• Missing "Wire.h" include

  #17 opened 4 years ago by bohdanyurov-gl
  3

• Compactible with expander PCA8574?

  #14 opened 5 years ago by mohdrais
  13

• Program design for multiple displays

  #15 opened 5 years ago by obdevel
  2

• Are 20x4 LCDs supported?

  #13 opened 5 years ago by jskubick
  2

• lcd.clear() in linewrap test causes 1st char of 1st line to be missed.

  #12 opened 5 years ago by alw1746
  8

• simple examples

  #11 opened 5 years ago by darkworks
  1

• Problems when creating hd44780_I2Cexp{} instances dynamically

  #8 opened 5 years ago by PatrykSSS
  21

• Safe backlight handling not triggered for bad LCDs

  #10 opened 5 years ago by inzanity
  2

• Help with Mega 2560

  #9 opened 6 years ago by melucas
  1

• LCD Address

  #7 opened 6 years ago by WRichardR
  1

• Line Wrap Demo omits first character after lcd.clear()

  #6 opened 6 years ago by cerkit
  5

• Hello World example - variable overflow

  #2 opened 7 years ago by Bodmer
  2

• NodeMCU compatibility

  #1 opened 8 years ago by Bodmer
  7

• Declaring hd44780_I2Cexp in header

  #3 opened 8 years ago by dromer
  13