dunewires/ElectricalMethod

Issues

• First frequency frame has more data than expected

  #98 opened 3 years ago
  1

• Choosing which scans contribute to final tensions

  #97 opened 3 years ago
  0

• Step size in single-segment scan

  #94 opened 3 years ago
  4

• Short wires have their tensions calculated

  #93 opened 3 years ago
  0

• UUID dropdown for tension tab

  #92 opened 3 years ago
  1

• Clickable orange button

  #91 opened 3 years ago
  0

• Tension table should show all layers simultaneously

  #90 opened 3 years ago
  1

• Clicking A to reset plot creates a red vertical line

  #89 opened 3 years ago
  1

• Broken Raw A(f) plots

  #88 opened 3 years ago
  1

• Resonance values don’t clear

  #87 opened 3 years ago
  1

• Remote firmware programming using Windows

  #86 opened 3 years ago
  1

• Automatic detection of programmer box

  #85 opened 3 years ago
  1

• Remove unnecessary configuration parameters

  #84 opened 3 years ago
  0

• Add validation for configuration parameters

  #83 opened 3 years ago
  2

• Generate unique IP per DWA

  #77 opened 3 years ago
  1

• Daresbury test list of issues

  #76 opened 3 years ago
  1

• DWA serial number

  #71 opened 3 years ago
  3

• Add time delay between scans

  #70 opened 3 years ago
  2

• remove RUN frame keys 2E and 2F (v2 relay masks)

  #69 opened 3 years ago
  1

• GUI in Windows launches outside the screen

  #67 opened 3 years ago
  1

• No data received when connecting twice DAQ to DWA

  #64 opened 3 years ago
  1

• Separate UDP counter for status

  #62 opened 3 years ago
  0

• Missing end run frame

  #61 opened 3 years ago
  5

• DWA Connection info

  #60 opened 3 years ago
  2

• Allow use of local IP address

  #59 opened 3 years ago
  1

• Software installation script

  #58 opened 3 years ago
  3

• Get/set all firmware config values in a single TCP communication

  #57 opened 3 years ago
  1

• AttributeError in post scan analysis

  #56 opened 4 years ago
  2

• Accurate amplitude fitting

  #55 opened 4 years ago
  1

• LED signals

  #54 opened 3 years ago
  3

• Populating runOdometer UDP variable and saving in non-volatile memory

  #53 opened 4 years ago
  0

• Populating stimPeriodCounter UDP variable

  #52 opened 4 years ago
  0

• Scan stops after end frequency

  #51 opened 3 years ago
  2

• Zooming changing size of graphs in GUI

  #50 opened 3 years ago
  5

• Frequency step varying during scan

  #49 opened 4 years ago
  2

• DAQ: Plot transform "Log X"

  #48 opened 4 years ago
  2

• DAQ speed limiting

  #47 opened 3 years ago
  1

• Frequency reported multiple times in UDP data

  #46 opened 3 years ago
  3

• Digipots not using configuration values

  #45 opened 4 years ago
  2

• Wrong end frequency in scan

  #44 opened 4 years ago
  2

• First scan frequency is skipped

  #43 opened 4 years ago
  2

• Firmware identifiers missing in UDP data

  #42 opened 3 years ago
  3

• DAQ does not remove previous-scan peak location lines

  #41 opened 4 years ago
  1

• DAQ freezes with lots of data

  #40 opened 3 years ago
  7

• Pushbuttons and LEDs

  #39 opened 3 years ago
  1

• Control LED0 for HV

  #38 opened 3 years ago
  1

• Heartbeat and other status information

  #37 opened 3 years ago
  2

• PDB LEDs should not be active by default

  #36 opened 4 years ago
  1

• DWA multiplexing

  #35 opened 3 years ago
  1

• Number of samples half but twice number of cycles

  #34 opened 3 years ago
  3