dustindclark/homebridge-envisalink

Issues

• No status for failed arming

  #288 opened a year ago by akagarwal
  5

• HomeKit Switch Identification

  #287 opened a year ago by akagarwal
  0

• Bypass support

  #286 opened a year ago by brennan-babb
  4

• Custom Command Issue - Button status resetting

  #272 opened 2 years ago by scoutbeer
  4

• What is the purpose of the off switch?

  #269 opened 2 years ago by carson-autocicd
  2

• Status not correct on restart, always initializes to off / disarmed

  #200 opened 2 years ago by dkerr64
  7

• Add Support for Envisalink UNO mode

  #251 opened 2 years ago by g1gem
  1

• Disarming from Panel does not have correct status in home app

  #181 opened 2 years ago by readylmay
  8

• Honeywell: Alarm request did not return successfully in allocated time.

  #228 opened 2 years ago by mtw13
  1

• Hoobs envisalink not working

  #199 opened 2 years ago by claudeguillemette
  0

• Logging Information

  #169 opened 2 years ago by donmoss1
  0

• fucntion of on/off switch in Homekit

  #166 opened 2 years ago by guylopes71
  2

• Allow Disabling Alarm Bypass Switch Using Config

  #156 opened 2 years ago by raphaeldavid
  2

• Ready State Notification

  #106 opened 2 years ago by donmoss1
  9

• Night Mode isn't reflected in HomeKit when set physically from keypad

  #101 opened 2 years ago by n8847
  2

• Actual disconnected (with log and config)

  #140 opened 2 years ago by tomhoag
  9

• Issue with disarming

  #158 opened 2 years ago by scaryfast8750
  6

• 2 questions, not really bugs

  #155 opened 2 years ago by guylopes71
  5

• Verbose Logging not Working

  #157 opened 2 years ago by readylmay
  4

• Cannot disarm alarm system with the homebridge-envisalink plug-in.

  #149 opened 2 years ago by OnlyMeTwo
  2

• Arm for away or home with existing zones open

  #82 opened 2 years ago by readylmay
  13

• Question about Smoke Detectors

  #112 opened 2 years ago by scaryfast8750
  3

• More Graceful Delay Between Commands

  #146 opened 2 years ago by dustindclark
  0

• Is there a setting to try and reconnect if connection is lost?

  #93 opened 2 years ago by MarcorX
  1

• Error setting panel state to 3:

  #108 opened 2 years ago by gbrentnell
  2

• Start up error - Misconfigured Alarm Zone Bypass switch definition Zone Bypass ignoring.

  #145 opened 2 years ago by Landonthi
  1

• No Entry Arming

  #99 opened 3 years ago by donmoss1
  24

• Envisalink stopped responding

  #110 opened 2 years ago by xtian1234
  8

• Multiple Home Kit Notifications on Arm

  #100 opened 2 years ago by readylmay
  2

• Error connecting to Envisalink

  #109 opened 2 years ago by tron786
  4

• Won't reconnect

  #107 opened 2 years ago by my99svt
  1

• Envisalink connection issue

  #105 opened 2 years ago by walschots
  1

• Plugin hangs following dropped connection

  #102 opened 2 years ago by jmjlai
  1

• duplicate/conflicting notifications

  #111 opened 2 years ago by scaryfast8750
  1

• Door and Smoke not compatible

  #104 opened 3 years ago by raphaeldavid
  1

• Connection Errors only emitted with verbose logging enabled

  #92 opened 3 years ago by JDonovanH
  4

• Not working after a few minutes

  #97 opened 3 years ago by cblong812
  1

• "Second set chime failed" on startup

  #94 opened 3 years ago by jmjlai
  5

• A Function Selected on Partition 1 is not Available

  #98 opened 3 years ago by anupchavda1
  2

• Incorrect alarm status

  #90 opened 3 years ago by peros550
  13

• Zone Skipping - Off by one zone?

  #96 opened 3 years ago by readylmay
  2

• [Envisalink] actual disconnected

  #95 opened 3 years ago by HerbM3
  8

• panel not showing up in hoobs

  #91 opened 3 years ago by stevemelamed
  1

• Question about Alarm Notification

  #89 opened 3 years ago by peros550
  7

• Smoke status doesn't work in 1.0.0

  #84 opened 3 years ago by dustindclark
  9

• Constantly restarting the Bridge

  #88 opened 3 years ago by briceunland
  1

• Last 3 zones are not showing up in 1.0.x

  #87 opened 3 years ago by fifibest
  2

• Enhancement - Stateful switch for "Chime"

  #86 opened 3 years ago by readylmay
  2

• Issue with undeclared zone

  #85 opened 3 years ago by peros550
  6

• Add Support for Custom Commands

  #81 opened 3 years ago by dustindclark
  2