duxingkei33/orangepi_PC_gpio_pyH3

Issues

• python.h missing

  #6 opened 8 years ago by AST-esp-rasp
  5

• port.PA15 & port.PA16

  #7 opened 8 years ago by nopnop2002
  4

• Voltage on pin in INPUT mode?

  #18 opened 4 years ago by AdvancedStyle
  0

• STATUS_LED is connected to a wrong pi number

  #17 opened 5 years ago by antonio-fernandez
  1

• No physical output of GPIO pins. Code works fine, LED is just not lighting or blinking

  #16 opened 5 years ago by ElLobo007
  0

• Interrupts python RPI GPIOstyle

  #9 opened 8 years ago by maco1717
  3

• Conflict with I2C extension during installation

  #11 opened 7 years ago by mtanwr
  0

• how can i control the speed (PWM) in orangepi zero

  #5 opened 8 years ago by DaniyalGeek
  1

• SPI for mcp23s17 on Orange Pi

  #8 opened 8 years ago by joaopedro2794
  0

• Thank you to share your code.

  #1 opened 8 years ago by feilongfl
  2

• Default SPI speed is much too slow

  #4 opened 8 years ago by martinayotte
  1

• POWER_LED not blink

  #3 opened 9 years ago by nopnop2002
  3

• /orangepi_PC_gpio_pyH3/pyA20/gpio/mapping.h

  #2 opened 9 years ago by nopnop2002
  1