Official FABRIC implementation for automatic1111/stable-diffusion-webui. Steer the model towards generating desirable results by simply liking/disliking images. These feedback images can be generated or provided by you and will make the model generate images that look more/less like the feedback. Instead of meticulously iterating on your prompt until you get what you're looking for, with FABRIC you can simply "show" the model what you want and don't want.
๐ Paper: https://arxiv.org/abs/2307.10159
๐จ Project page: https://sd-fabric.github.io
ComfyUI node (by @ssitu): https://github.com/ssitu/ComfyUI_fabric
- [09.03.2024] ๐ก๏ธ v0.6.6: Adds "burnout protection", which helps prevent low-quality results when a large number of feedback images is used.
- [07.03.2024] ๐จ v0.6.5: Fixes compatibility with WebUI Forge.
- [07.03.2024] โจ v0.6.4: SDXL support has been added. For optimal results, lowering the feedback strength is recommended (0.5 seems to be a good starting point).
- [29.08.2023] ๐๏ธ v0.6.0: Up to 2x faster and 4x less VRAM usage thanks to Token Merging (tested with 16 feedback images and a batch size of 4), moderate gains for fewer feedback images (10% speedup for 2 images, 30% for 8 images). Enable the Token Merging option to take advantage of this.
- [22.08.2023] ๐๏ธ v0.5.0: Adds support for presets. Makes generated images using FABRIC more reproducible by loading the correct (previously used) feedback images when using "send to text2img/img2img".
- Open the "Extensions" tab
- Open the "Install from URL" tab
- Copy-paste
https://github.com/dvruette/sd-webui-fabric.git
into "URL for extension's git repository" and press "Install" - Switch to the "Installed" tab and press "Apply and restart UI"
- (optional) Since FABRIC is quite VRAM intensive, using
--xformers
is recommended.- If you still run out of VRAM, try enabling the "Token Merging" setting for even better memory efficiency.
- FABRIC is compatible with SD 1.5, SDXL and WebUI Forge
- The plugin is INCOMPATIBLE with
reference
mode in the ControlNet plugin. Instead of using a reference image, simply add it as a liked image. If you accidentally enable FABRIC andreference
mode at the same time, you will have to restart the WebUI to fix it. - Some attention processors are not supported. In particular,
--opt-sub-quad-attention
and--opt-split-attention-v1
are not supported at the moment.
- Enable the FABRIC extension
- Add feedback images:
- select an image from a previous generation and press ๐/๐ in the "Current batch" tab OR
- select the "Upload image" tab, upload an image of your preference and press ๐/๐
- Press "Generate" to generate a batch of images incorporating the selected feedback
- Repeat: Add more feedback, optionally adjust your prompt and regenerate
Tips:
- You don't have to keep using the same prompt that you used to generate feedback images. In fact, adjusting the prompt in conjunction with providing feedback is most powerful.
- While the number of feedback images is only limited by the size of your GPU, using fewer feedback images tends to give better results that clearly reflect both the prompt and feedback. Increasing the number of feedback images can sometimes lead to the model getting confused, giving too much weight to certain feedback images or completely ignoring others.
The feedback strength controls how much the model pays attention to your feedback images. The higher, the more it will try to stay close to the feedback, potentially ignoring certain aspects of the prompt. Lowering this value is recommended if you're using large numbers of feedback images or if you feel like the model sticks too close to the feedback.
Using feedback start
and feedback end
it's possible to control at which denoising steps the model tries to incorporate the feedback. As a rule of thumb, early steps will influence high-level, coarse features (overall composition, large objects in the scene, ...) and later steps will influence fine-grained, low-level features (details, texture, small objects, ...). Adjusting these values makes it possible to only use feedback on certain features in the generation. A value of 0.0
corresponds to the first and 1.0
to the last denoising step (linear interpolation in between).
Generally, it's recommended to have feedback active from the start but not until the end, but violating these principles can give interesting results in their own right, especially when simultaneously adjusting feedback strength.
Token merging (ToMe) is an optimization technique that improves speed and memory usage at the cost of accuracy. Enabling this will change your results, but it can make generation times significantly faster (I observed up to 50%), especially for large resolutions and large numbers of feedback images.
Generating images in a certain style, adding them as feedback and dropping the style from the prompt allows retaining certain aspects from the style while retaining flexibility in the prompt:
Negative prompt: lowres, bad anatomy, bad hands, cropped, worst quality
; Seed: 1531668169
Feedback strength controls how much the model pays attention to the feedback. This example demonstrates the effect of varying it:
Feedback image | |||
---|---|---|---|
![]() |
|||
weight=0.0 | weight=0.2 | weight=0.4 | weight=0.8 |
![]() |
![]() |
![]() |
![]() |
Prompt: [macro picture of a pineapple, zoomcore:photo of new york at sunrise:0.3], masterpiece, trending on artstation[:, extremely detailed, hyperrealistic, 8k:0.5]
; Negative prompt: lowres, bad anatomy, bad hands, cropped, worst quality, grayscale
; Seed: 2345285976
;
By adjusting the feedback schedule, it's possible to control which features are influenced by the feedback. In this example, the feedback is only active between 30% and 60% of the generation, which allows to isolate the effect of the feedback:
Feedback image | Without feedback | Default schedule (0.0 - 0.8) | Custom schedule (0.3 - 0.6) |
---|---|---|---|
![]() |
![]() |
![]() |
![]() |
Prompt: a woman with long flowy hair wearing a (dress made of pink flowers:1.1) sitting on a sunny meadow, vibrant
; Negative prompt: lowres, bad anatomy, bad hands, cropped, worst quality, grayscale, muted colors, monochrome, sepia
; Seed: 2844331335
All examples were created using the DreamShaper 7 model: https://huggingface.co/Lykon/DreamShaper/tree/main
Advanced Usage
Adjusting the minimum feedback strength controls how much feedback is incorporated during the passive phase, outside of the feedback schedule (i.e. when FABRIC is "inactive", before feedback start
and after feedback end
). This allows emphasizing the feedback during certain phases (feature scales) of the generation but still incorporating at least some of it from beginning to end. By default this is 0, so feedback is only incorporated during the active phase.
The negative weight controls how much negative feedback is incorporated relative the the positive feedback. We have found that it's generally preferrable to have lower feedback strenth for negative images, which is why by default this value is 0.5
. Increasing this increases the influence of negative feedback (without changin the influence of positive feedback).
These settings are quite technical and understanding them is not strictly necessary for using them. Merge ratio controls the ratio of tokens that get merged: higher merge ratio -> fewer tokens -> more speed and less memory, but lower quality. Max. tokens limits the number of feedback tokens: fewer tokens -> more speed, less memory, but lower quality. The seed controls which tokens have a chance of being merged and is mainly there for reproducibility purposes. Changing the seed can alter the outcome quite significantly depending on how aggressive the other ToMe settings are.
More information on ToMe: https://github.com/dbolya/tomesd/tree/main
@misc{vonrutte2023fabric,
title={FABRIC: Personalizing Diffusion Models with Iterative Feedback},
author={Dimitri von Rรผtte and Elisabetta Fedele and Jonathan Thomm and Lukas Wolf},
year={2023},
eprint={2307.10159},
archivePrefix={arXiv},
primaryClass={cs.CV}
}