Desired Features
- Measure/log acceleration (in G's) on the axis (X, Y)
- Measure/log tilt angle in degrees along Z axis
- Log speed from GSX-R600
- Log RPM from GSX-R600
- Log Engine Coolant Temperature (ECTS)
- Log Throttle Position (Degrees?) (TPS)
- Log Gear Position (GPS)
Speed Sensor/GPS/TPS/ECTS
- Pin 6 ECM Terminal
- B/G
- Output
- TTL Square wave
Tachometer
- Pin 38 ECM Terminal
- Unknown color
- Output
- Possible TTL Square wave (1 pulse per revolution)
Power Source
- Pin 17 ECM Terminal
- Unknown color
- Output
- Unknown
Ground
- Pin 34 ECM Terminal
- B/W
- Output
- N/A
Parts List
- Arduino Nano 3.0 (ATMEGA328)
- Analog Devices Triple Axis Accelerometer Breakout - ADXL345
- LM7805 Voltage Regulator
- Breakout Board for SD-MMC Cards
- 3 x 1.8k Resistor
- 3 x 3.3k Resistor
- Wire Splices
- 4 Pin Female Connector (Board Mount)
- 4 Pin Male Connector
- Breadboard Clear Self-Adhesive
- Heatshrink Tubing
- Control Switch for Right Handlebar