dymensionxyz/roller

Issues

• Impossible to create IBC Channel

  #1060 opened 2 months ago by AviaOne
  4

• Can not create IBC channel or RPC port connection fail.

  #1019 opened 2 months ago by Adamtruong6868
  2

• roller relayer setup

  #1033 opened 2 months ago by barburan1
  7

• failed to create IBC Channel when setup relayer

  #1040 opened 2 months ago by ardianreiss
  1

• Sequencer would not start because Rollap genesis supply differs from 1b

  #1053 opened 2 months ago by Jaytechent
  1

• install.sh has error

  #1057 opened 2 months ago by Adamtruong6868
  2

• Can't update sequencer metadata

  #1049 opened 2 months ago by blacktokyo96
  1

• Unable to create an IBC channel. Result command execution failed:exit status 1

  #1056 opened 2 months ago by Proskhmer08
  5

• Change roller to support new DRS format

  #1089 opened 3 months ago by omritoptix
  0

• Add roller hotfix command to apply a binary upgrade

  #1088 opened 3 months ago by omritoptix
  0

• Error RPC

  #1087 opened 3 months ago by motleyhuman
  0

• Relayer issue - exit status 1, stderr: Error: rpc error: code = InvalidArgument desc = failed to load state at height 0

  #1086 opened 3 months ago by xhinis
  0

• [bug] the sequencer metadata doesn't check for valid url:port and trailing symbols

  #1084 opened 3 months ago by artemijspavlovs
  0

• [Feature Request]: rollapp Playground phase 2

  #1083 opened 3 months ago by OneNov0209
  0

• Roller Setup Error

  #1082 opened 3 months ago by okannako
  0

• The eibc service is shutting down after 30 seconds

  #1011 opened 3 months ago by 5am-dev
  1

• Cannot create IBC Channel if RollApp is using WASM

  #1010 opened 3 months ago by 5am-dev
  1

• Relayer does not check for at least one block produced by sequencer

  #997 opened 3 months ago by danwt
  0

• handle sequencer `pre-launch-time` during `roller rollapp setup`

  #1079 opened 3 months ago by artemijspavlovs
  0

• Problem with transaction when using ledger with MM or Rabby wallet

  #1077 opened 3 months ago by Melix85
  1

• Add ability to generate config and genesis for testnet and mainnet

  #1046 opened 4 months ago by omritoptix
  1

• Add support for setting sequencer reward address and relayer whitelisted addresses

  #1076 opened 3 months ago by omritoptix
  0

• [Feature Request]:

  #1055 opened 3 months ago by omerbek
  2

• [bug] fix p2p peer fetching from chain during full node initialization

  #1068 opened 3 months ago by artemijspavlovs
  0

• Add `roller rollapp snapshot create` command

  #1075 opened 3 months ago by artemijspavlovs
  0

• RollApp tokens are not transferred from RollApp to Dymension: remain in Pending

  #1074 opened 3 months ago by seda33
  0

• Relayer can not handle TXs amount

  #1071 opened 3 months ago by Adamtruong6868
  0

• healthAgent on rollapp nodes

  #1018 opened 3 months ago by omritoptix
  0

• Add helper functions to handle `da-light-client`

  #1017 opened 3 months ago by artemijspavlovs
  0

• Resolving Proposer Not Found and Sequencer Jailed Issues in Dymension Network

  #1066 opened 3 months ago by batuhankocyigit
  0

• [Feature Request]: Install binaries in user folder instread of system wide path

  #1065 opened 3 months ago by mtsitrin
  0

• Token Staking Error: Minimum Sponsorship Weight Issue

  #1061 opened 4 months ago by batuhankocyigit
  2

• Rollapp not reaching height 1

  #1062 opened 4 months ago by bluebleublack
  2

• Degraded

  #1050 opened 4 months ago by xhinis
  4

• My sequencer is jailed

  #1063 opened 4 months ago by salihayer
  0

• [eibc] ask for fee percentage for the rollapp and rollapp's denom being initialized

  #1041 opened 4 months ago by artemijspavlovs
  0

• Bug in Roller Setup: RollApp DA Light Client Fails to Start Properly and set up relayer

  #1039 opened 4 months ago by ferianto-dropid
  2

• Pool Create Bug

  #1051 opened 4 months ago by geocmsk
  2

• When I try to change the Display Name section, it gives an error

  #1048 opened 4 months ago by kaplanbitcoin1
  0

• Support ledger signing/cold wallet

  #1047 opened 4 months ago by artemijspavlovs
  0

• Fail to create IBC Channel in EVM Rollapp

  #1043 opened 4 months ago by Adamtruong6868
  2

• Relayer stuck at starting due to error: genesis supply is incorrect/invalid character "/n" in the genesis file.

  #1032 opened 4 months ago by Proskhmer08
  2

• Change all coin types to 60

  #1034 opened 4 months ago by omritoptix
  1

• Roller should add by default to all relayer config `extra-codecs: [`ethermint`]`

  #1037 opened 4 months ago by omritoptix
  0

• mock wasm not initialized well

  #994 opened 4 months ago by omritoptix
  0

• RollApp: command execution failed: fork/exec /usr/local/bin/rollappd: permission denied, stderr:

  #1031 opened 4 months ago by staking4all
  2

• Have a problem start rollap

  #1029 opened 4 months ago by aksamlan
  1

• Add celestia address with the current balance to the output of `rollapp status` command

  #1016 opened 4 months ago by artemijspavlovs
  0

• Roller creates new sequencer on Hub even though rollapp already has a sequencer registered

  #998 opened 4 months ago by danwt
  1

• runnning relayer in foreground doesn't check for sequencer health

  #996 opened 4 months ago by omritoptix
  2