Running Ruby Code

Learning Goals

Run Ruby code from a file
Log output to the terminal
Run Ruby code from IRB
Run RSpec tests in Ruby

Introduction

In this lesson, you'll get some practice running Ruby code, and see a few different ways to check what your code is doing. Make sure to code along to get comfortable in this new environment!

Creating a Ruby Application

Let's dive right in. To get started on any new Ruby application, the first thing we need is a file. Create a new file in this lab directory called app.rb. In this file, add the following:

# app.rb
puts "Hello world!"

puts is a built-in Ruby method that will output a string of text to the terminal. It's the Ruby equivalent of console.log() in JavaScript. It will print the string "Hello world!" along with a line break at the end.

The line above puts is a Ruby comment. In Ruby, any line that starts with a # won't be executed by the interpreter. This is the Ruby equivalent of // in JavaScript.

One important thing to note about Ruby methods that we'll explore further: in Ruby, using parentheses when invoking a method is optional. You can also write the above code like this:

# app.rb
puts("Hello world!")

Both of these examples will do the same thing; but for Rubyists, the first syntax is preferred since it is more pleasant to look at.

Running Ruby Applications

Unlike JavaScript, you won't be running Ruby applications in the browser. Instead, you'll need to use the Ruby interpreter to run your code from the terminal. You can check which version of Ruby you're using with this command:

$ ruby -v
ruby 2.7.3p183 (2021-04-05 revision 6847ee089d) [x86_64-darwin19]

To run the application, enter the command ruby filename.rb, where filename.rb is the relative path to the file you'd like to run:

$ ruby app.rb
Hello world!

Congrats on running your first Ruby application! 🎉

Ruby Terminal Output Methods

Now that we have a place to write some code, let's explore a few of Ruby's built-in methods for displaying info in the terminal so you can easily inspect your code as you are writing it.

Outputting Strings with `puts` and `print`

Ruby has several methods for printing output to the terminal: puts, print, p, and pp.

print and puts do almost the same thing; the only difference is that puts will add a line break at the end of the string. Try updating the code in app.rb to the following:

# app.rb
puts "Hello world!"
puts "Hello world!"
puts "Hello world!"

Run the application with ruby app.rb. Then change puts to print and run it again to see the difference in output:

# app.rb
print "Hello world!"
print "Hello world!"
print "Hello world!"

Inspecting Data with `p` and `pp`

puts and print are great for working with strings and displaying them in the terminal, but it's often helpful to be able to inspect other kinds of data that aren't so easily represented as strings.

For example, if we had an array and we wanted to inspect it in the console, puts might not be the best way.

# app.rb
puts [1, 2, 3]

When using puts on something that isn't already a string, Ruby will coerce the data to a string by calling the .to_s method. In the case of arrays, this will produce the following output, with each element of the array printed to a new line in the console:

$ ruby app.rb
1
2
3

This is where the p method comes in handy:

# This is the equivalent of calling:
# puts [1, 2, 3].inspect
p [1, 2, 3]

The p method will output the data in a nicer format by calling the .inspect method on our data.

$ ruby app.rb
[1, 2, 3]

Ruby has one more method, pp, for "pretty-printing" complex data, such as nested arrays and hashes (the Ruby equivalent of a JavaScript object):

# app.rb
pp [{ id: 1, hello: "World" }, { id: 2, hello: "Ruby" }, { id: 3, hello: "Moon" }, { id: 4, hello: "Learner" }]

The pp method will "pretty-print" these objects by calling the .pretty_inspect method on our data.

$ ruby app.rb
[{:id=>1, :hello=>"World"},
 {:id=>2, :hello=>"Ruby"},
 {:id=>3, :hello=>"Moon"},
 {:id=>4, :hello=>"Learner"}]

Exploring Ruby with IRB

Ruby comes with a tool called IRB (Interactive Ruby) for running a Ruby REPL (read-evaluate-print-loop) in the terminal, which provides similar functionality to the browser console that you're familiar with from JavaScript. Using IRB is a great way to quickly test out some code, or check your syntax, without needing to run an entire application.

To use IRB, go into the terminal and enter irb:

$ irb
2.7.3 :001 >

This gives you a prompt where you can enter Ruby code. Try entering in puts "Hello IRB":

2.7.3 :001 > puts "Hello IRB"
Hello IRB
 => nil

You'll notice that two lines are output: Hello IRB, then => nil. The first line is the output of the puts method; the second line is the return value of the puts method. IRB indicates that this is the return value with the => symbol. In Ruby, all methods have a return value. nil in this case means "no value", similar to null in JavaScript.

Try running a few more expressions in IRB:

> first_number = 7
 => 7
> first_number
 => 7
> puts first_number
7
 => nil

In the code above, we've declared a local variable called first_number and assigned it a value of 7. Note the difference between just entering first_number and entering puts first_number: in the first case, the return value is 7, in the second case, the return value is nil. Using the correct return value will become more important once we start writing methods, so remember: the puts method always returns nil.

In Ruby, it's convention to use underscores (_) to separate words in variables. This is referred to as snake case (as opposed to camel case, which is the convention in JavaScript).

You can exit IRB by typing exit, or pressing ctrl + d.

Running RSpec Tests

All the lessons in the Ruby curriculum use the RSpec library for testing your Ruby code.

In this lesson, you'll see a spec folder with two files, app_spec.rb and spec_helper.rb. The spec_helper.rb file does a bit of general-purpose setup for our tests. app_spec.rb is where we've defined tests specifically for this lesson.

RSpec is a Ruby gem (the Ruby equivalent of a npm package) that provides a domain-specific language, or DSL, that makes it very nice way to write tests. The RSpec library was installed on your system as part of installing the learn-co gem earlier in the program.

Let's take one of these tests as an example to see RSpec's DSL:

it 'outputs the string "Pass this test, please." using the print method' do
  expect { load 'app.rb' }.to output(a_string_including("Pass this test, please.")).to_stdout
end

All of this is valid Ruby code, but it should read (more or less) like English:

Expect that loading the app.rb file will output a string including the text "Pass this test, please." to the terminal's standard output.

Clear out the code in app.rb to start from scratch so we can try getting these tests to pass.

To run the tests, you can use either the rspec command or learn test. Run the command, then take a moment to study the output:

$ learn test

the program
  has a file app.rb
  outputs the string "Hello World!" using the puts method (FAILED - 1)
  outputs the string "Pass this test, please." using the print method (FAILED - 2)
  outputs the array [1, 2, 3] using the p method (FAILED - 3)

Failures:

  1) the program outputs the string "Hello World!" using the puts method
     Failure/Error: expect { load 'app.rb' }.to output(a_string_including("Hello World!\n")).to_stdout

       expected block to output a string including "Hello World!\n" to stdout, but output nothing
       Diff:
       @@ -1 +1 @@
       -(a string including "Hello World!\n")
       +""

     # ./spec/app_spec.rb:10:in `block (2 levels) in <top (required)>'

  2) the program outputs the string "Pass this test, please." using the print method
     Failure/Error: expect { load 'app.rb' }.to output(a_string_including("Pass this test, please.")).to_stdout

       expected block to output a string including "Pass this test, please." to stdout, but output nothing
       Diff:
       @@ -1 +1 @@
       -(a string including "Pass this test, please.")
       +""

     # ./spec/app_spec.rb:14:in `block (2 levels) in <top (required)>'

  3) the program outputs the array [1, 2, 3] using the p method
     Failure/Error: expect { load 'app.rb' }.to output(a_string_including("[1, 2, 3]\n")).to_stdout

       expected block to output a string including "[1, 2, 3]\n" to stdout, but output nothing
       Diff:
       @@ -1 +1 @@
       -(a string including "[1, 2, 3]\n")
       +""

     # ./spec/app_spec.rb:18:in `block (2 levels) in <top (required)>'

Finished in 0.04406 seconds (files took 0.28088 seconds to load)
4 examples, 3 failures

Failed examples:

rspec ./spec/app_spec.rb:6 # the program outputs the string "Hello World!" using the puts method
rspec ./spec/app_spec.rb:13 # the program outputs the string "Pass this test, please." using the print method
rspec ./spec/app_spec.rb:17 # the program outputs the array [1, 2, 3] using the p method

RSpec provides all kinds of useful information about what went right and wrong with our code, so make sure to spend your time reading all the output here! It will tell you:

Which tests passed/didn't passed
Why each failing test failed (the difference between the expected output and the actual output)
The line number of the failing test

You can also use the --fail-fast, or --f-f flag to tell RSpec to stop running after the first failing test. This technique is helpful for focusing your attention on one problem at a time:

$ learn test --f-f

the program
  has a file app.rb
  outputs the string "Hello World!" using the puts method (FAILED - 1)

Failures:

  1) the program outputs the string "Hello World!" using the puts method
     Failure/Error: expect { load 'app.rb' }.to output(a_string_including("Hello World!\n")).to_stdout

       expected block to output a string including "Hello World!\n" to stdout, but output nothing
       Diff:
       @@ -1 +1 @@
       -(a string including "Hello World!\n")
       +""

     # ./spec/app_spec.rb:10:in `block (2 levels) in <top (required)>'

Finished in 0.0389 seconds (files took 0.24407 seconds to load)
2 examples, 1 failure

Failed examples:

rspec ./spec/app_spec.rb:6 # the program outputs the string "Hello World!" using the puts method

Instructions

To finish this lab, use the puts, print, and p methods in the app.rb file as described by the tests:

Use puts to display the string "Hello World!"
Use print to display the string "Pass this test, please."
Use p to display the array [1,2,3]

Using learn test will run the tests and sync your progress with GitHub and Canvas. When your tests are all passing, the lab is complete!

Conclusion

This lesson covered a good amount of material, but now you should be familiar with running code in a Ruby environment, and using tools like IRB and RSpec as well as built-in methods like puts to understand what happens when your Ruby code is running. You'll need all these tools going forward, so make sure to get practice with all of them as you progress through this phase!

e-nk/phase-3-running-ruby-code

Running Ruby Code

Learning Goals

Introduction

Creating a Ruby Application

Running Ruby Applications

Ruby Terminal Output Methods

Outputting Strings with `puts` and `print`

Inspecting Data with `p` and `pp`

Exploring Ruby with IRB

Running RSpec Tests

Instructions

Conclusion

Resources

rewrite-array-methods

e-nk/phase-3-running-ruby-code

Running Ruby Code

Learning Goals

Introduction

Creating a Ruby Application

Running Ruby Applications

Ruby Terminal Output Methods

Outputting Strings with puts and print

Inspecting Data with p and pp

Exploring Ruby with IRB

Running RSpec Tests

Instructions

Conclusion

Resources

rewrite-array-methods

Outputting Strings with `puts` and `print`

Inspecting Data with `p` and `pp`