ebaauw/homebridge-ups

Issues

• homebridge-ups crashes homebridge?

  #22 opened 6 months ago by clayton256
  21

• log level errors and heartbeat errors

  #19 opened 6 months ago by sapireli
  8

• Anoying message in homebridge console: Upsilon 2000 Battery: Remaining Duration: get: return 0 seconds

  #18 opened 6 months ago by pcontezini
  5

• Switch to contact sensor instead of outlet with a stateless switch for mute.

  #17 opened 8 months ago by sapireli
  6

• log level setting

  #16 opened 9 months ago by sapireli
  1

• How to configure Homebridge-ups with Synology

  #15 opened a year ago by ismkaya
  9

• Invalid Name

  #14 opened a year ago by elcid2012
  4

• Log mixes internal/set name

  #13 opened a year ago by normen
  5

• Is it possible to add Battery Percentage as a Sensor?

  #12 opened a year ago by milkandbourbons
  3

• Is it possible to add information on a leak sensor ?

  #11 opened a year ago by BenouGui
  3

• Invalid name

  #10 opened a year ago by tomtom340
  1

• Rounding causes total consumption to never be greater than 0.00 kWH

  #8 opened 2 years ago by toofishes
  3

• No values displayed.

  #5 opened 2 years ago by marmitol
  15

• Share a guide for configure the UPS.

  #7 opened 2 years ago by ALF-2021
  1

• When the battery is discharging, HomeKit still shows it as charging.

  #3 opened 2 years ago by dacarson
  4

• When the UPS has no mains power, HomeKit reports input voltage as 100v

  #4 opened 2 years ago by dacarson
  6

• Total Consumption should be in Wh or divided by 1000.

  #6 opened 2 years ago by alexp999
  1

• Error message in homebridge log

  #1 opened 2 years ago by eabakker
  13

• UPS is missing ups.firmware

  #2 opened 2 years ago by dacarson
  2