A breakout board for one of the cheap NRF24L01 modules for Raspbery Pi.
##Module pin outs Top view of the NRF24L01 modules pins are assumed to be:
8 Pin
|GND |3v3 |
|CE |CSN |
|SCK |MOSI |
|MISO |IRQ (not connected)|
10 Pin
|3v3 |3v3 |
|CE |CSN |
|SCK |MOSI |
|MISO |IRQ (not connected)|
|GND |GND |
Please check that your modules match one of these pin layouts otherwise you risk damaging your raspberry pi or the NRF24L01 module.
Top | Bottom |
---|---|
Select the resistor values for the LED's. The raspberry pi can only source up to 16mA through the GPIO pins. Suggested bill of matterials includes:
http://uk.farnell.com/ part numbers:
Part | Description | Qty | Cost (GBP) |
---|---|---|---|
209-9221 | 0603 Red LED | 1 | 0.054 |
122-6372 | 0603 Green LED | 1 | 0.052 |
209-9222 | 0603 Orange LED | 1 | 0.056 |
207-3958 | 0402 100 Ohm | 3 | 0.021 |
175-9414 | 0805 4.7uF | 1 | 0.041 |
2.54mm female headers are also required for the board. A single 2x13 16 position header for the raspberry pi and a 2x4 8 position or 2x5 10 position female header for the NRF24L01 module.