eblot/pyftdi

Issues

• SPI reads all 1's (0xFF's) off of FT2232H

  #383 opened 4 months ago by nickhdc33
  14

• Unable to configure EEPROM on 232R: No EEPROM decoder for device ?

  #309 opened 3 years ago by sutyum
  2

• Retry issue with SPI reads

  #346 opened 6 months ago by andreasWallner
  5

• Trying to write `channel_a_type = 1` to EEPROM connected to FT232H causes `KeyError: '1'` exception

  #380 opened 7 months ago by FreddieChopin
  1

• Bus C and D are used as serial ports and A and B are used as gpio, Will there be any conflict when the four are used together

  #381 opened 7 months ago by zhimayun
  0

• Default state for CBUS pins in GPIO mode?

  #379 opened 8 months ago by dellagd
  0

• No such device / 4 USB devices match URL 'ftdi:///2'

  #377 opened 9 months ago by Shoyur
  2

• Incorrect results when reading i2c with clock stretching

  #373 opened 9 months ago by pe1obw
  0

• How to get fdti url?

  #316 opened 2 years ago by fredy0219
  7

• in_waiting and out_waiting in pyftdi/serialext/protocol_ftdi.py not implemented but return always 0

  #372 opened 10 months ago by SeDi343
  2

• "Error: No backend available" during Mac OS instllation.

  #370 opened 10 months ago by zapta
  1

• Error in class I2CBusScanner logic - if read success, skips write test

  #369 opened 10 months ago by dphaas
  1

• GPIO state reset when opening device

  #368 opened a year ago by jsteinhofff
  0

• UART lock up with FT4232H

  #366 opened a year ago by rakeshhegde
  1

• Unable to configure EEPROM: EEPROM does not support mirroring

  #365 opened a year ago by jokubas11
  1

• clearing eeprom

  #361 opened a year ago by jmfloyd
  0

• Timeout behaviour of read method not compatible with pyserial

  #360 opened a year ago by mazzmann
  1

• Specification issue in I2cController.exchange(self, out, readlen, relax, start)

  #359 opened a year ago by renmarq
  0

• Intermittent errors when accessing FTDI

  #358 opened a year ago by srobertjames
  5

• 0.54.0 FT230x EEPROM API inaccuracies

  #351 opened a year ago by timothy-lee2415
  2

• How to enable TXDEN on FT4232H?

  #355 opened a year ago by Wiggan
  0

• Low baudrates doesn't work with bit-banging.

  #353 opened a year ago by evading
  0

• 0.55.0 not on pypi.org

  #352 opened a year ago by dvzrv
  3

• 0.54.0: Deprecated setuptools functionality in use, will break on 2023-10-30

  #347 opened a year ago by dvzrv
  3

• 0.55 Operation not supported or unimplemented on this platform (FT4232HA) Windows

  #350 opened a year ago by MSOcu
  1

• spi exchange essue

  #340 opened 2 years ago by sanketchavan9823
  1

• Multiple 232H

  #339 opened 2 years ago by richcj10
  1

• Not all devices are released with UsbTools.release_all_devices

  #343 opened 2 years ago by marcintomiczek
  1

• LSB first with MPSSE SPI?

  #344 opened 2 years ago by wuzhongjie1997
  2

• Intermittent "the device has no langid" error, can't be cleared without a new process

  #342 opened 2 years ago by nmichaels-qualinx
  2

• config.py -l raw won't work

  #337 opened 2 years ago by mc3359
  0

• eeprom.dump_config() cannot dump EEPROM configuration when two devices are attached

  #335 opened 2 years ago by gkamendje
  3

• Programming clones

  #336 opened 2 years ago by vogelfreiheit
  1

• unable to read streaming data from USB device

  #334 opened 2 years ago by insane-dreamer
  6

• pyftdi not acquiring serial num/id from FTDI dongle on Ubuntu

  #332 opened 2 years ago by insane-dreamer
  2

• The last bit of every byte is missing when reading data

  #318 opened 2 years ago by idanuliel
  4

• Rasberry Pi 4

  #322 opened 2 years ago by Notselwyn
  2

• Invalid TMS length error when JtagEngine.go_idle() issues when already idle

  #331 opened 2 years ago by tgbotsford
  0

• inversion of RxD TxD via eeprom conf

  #323 opened 2 years ago by schaechtelchen
  1

• Does ftdi device work only as a master in SPI?

  #325 opened 2 years ago by romdos
  1

• BitSequence Bug by using bits with padded zeros

  #317 opened 2 years ago by bauergeorg
  1

• Permission issue ignore

  #311 opened 3 years ago by PatrikKr010
  1

• 93C66 EEPROM size is 512 bytes not 1024

  #315 opened 2 years ago by SurfCityMojo
  1

• I2C clock is stretching every I2C transactions.

  #313 opened 2 years ago by russelmallari
  0

• Error running example to use GPIO with I2C

  #312 opened 2 years ago by pond-fssw
  1

• Pyftdi issue with multiprocessing

  #310 opened 3 years ago by PedroACFerreira
  0

• Cannot talk to FTDI interface #2

  #307 opened 3 years ago by Kelian98
  0

• Couldn't set int as serial number

  #306 opened 3 years ago by corteccia
  0

• Specific solution for older Mac models experiencing "Error: Access denied (insufficient permissions)"

  #305 opened 3 years ago by alexanderkjones
  0

• I don't understand how to blink the RX or TX leds on the FT232

  #303 opened 3 years ago by Zibri
  1