eddie3600

eddie3600's Stars

• sanni/cartreader

  A shield for the Arduino Mega that can back up video game cartridges.

  Language:C++2.2k101109224

• x-station/xstation-releases

  Firmware and loader updates for the xstation, as well as the installation guides

  2194105

• ClusterM/fdskey

  Famicom Disk System drive emulator

  Language:C194122116

• jeffqchen/PS2EasyHDD

  A 3D printed shell for PS2 Network Adapter that allows easy access to the hard drive.

  124885

• citrus3000psi/SD2SP2

  Micro SD Card Adapter for Gamecube's Serial Port 2

  12113423

• jago85/UltraPIF_Hardware

  N64 PIF Replacement Hardware (KiCad)

  669118

• SukkoPera/OpenPSX2AmigaPadAdapter

  Playstation to Commodore Amiga/CD32 Controller Adapter

  Language:C++588911

• zaxour/TripleBypassV2Plus

  Variant of Tian Feng's Triple Bypass V2 with fixes and functionality added

  51863

• borti4938/n64adv2_pcb

  47340

• pyroesp/PlayStation-1-Reset-Mod

  PlayStation 1 Controller Reset mod

  Language:C445156

• borti4938/n64adv2_fw

  Language:C34802

• TzorriMahm/N64_RGB_Amp

  A modding board to achieve RGB video on some early NTSC models by using TI's THS7374 video amplifier.

  34123

• jeffqchen/TwinDiamond-Twin-Famicom-Expansion-to-NES-SNES-Controller-Adapter

  TwinDiamond - Twin Famicom Expansion A to NES/SNES Controller Adapter

  33203

• zaxour/TurboNanza

  An internal RGB, S-Video, Composite video and Audio modification for the Turbografx 16

  334103

• dalogue1/PicoDVI-N64_PCB

  Project creating a PCB to connect to the PicoDVI-N64 project.

  19402

• pce-devel/PCE_TurboEverdrive_USB

  Program to send ROM files to Turbo Everdrive; reverse-engineered and designed to be platform-independent

  Language:Python18700

• takusan213/usb-ss3d-gamepad

  This project remakes your SEGA Multi Controller (aka 3D Control Pad in US) into a usb gamepad.

  Language:C16401

• consolesunleashed/sony-playstation-multi-output-frequency-oscillator

  Sony PlayStation Multi Output Frequency Oscillator (MOFO) is a dual clock mod that provides a switchable PAL/NTSC GPU clock, a switchable PAL/NTSC encoder subcarrier clock, and a fixed PAL60 subcarrier clock for those with single format CRT TVs.

  15340

• jeffqchen/PSone-Filament-LCD-Backlight-Mod

  DIY Backlight mod that uses the new filament LED strips.

  15200

• borti4938/Switchless_SEGA_MasterSystem_MegaDrive

  Language:Assembly11304

• tzmwx/SEGA-SATURN-BUILT-IN-MEMORY-4M

  11201

• borti4938/n64rgb_pcb

  9213

• consolesunleashed/sony-playstation-x-reset

  X-Reset - The world's best PlayStation reset mod. A perfect add-on for PSIO and X-Station.

  6100

• L10N37/DFO-PS1-PSXTAL

  A PS1 DFO using Atmega328P MCU and an SI5351 clock generator IC

  6302

• zaxour/Saturn_10Pin_DIN_Breakout

  This is a simple breakout board for a 10 Pin DIN, such as that found on the Saturn. This was created to be used in conjunction with the TurboNanza Turbografx 16 modification so that composite, S-video and RGB could all be output through a single connector.

  5100

• zaxour/JumboDIN_to_MiniDIN

  A small adapter board that allows installation of a mini DIN where a standard/jumbo size DIN resides (i.e. Model 1 Genesis, Turbo Duo)

  4101

• zaxour/PsOne_LEDBoard

  Simple switch board for PsOne LCD LED mods.

  310

• zaxour/TurboGrafx16_PCE_RFModulator_DinMount

  A small board for mounting a Mini DIN in place of the RF Modulator in Turbografx/PC Engine systems

  310

• consolesunleashed/9-pin-mini-din-breakout-pcb

  A simple breakout PCB for a 9-Pin Mini DIN. There is a jumper to link the left and right audio channels and a jumper to send the left channel or both to the mono audio output pin.

  2100

• feedbackloopchannel/fluke19x-programmer

  Language:C13