ArduinoThread: A C++ repository from eddskt

ArduinoThreads Motivation

Arduino does not support isolated parallel tasks (Threads), but we can make the main loop switch function execution conditionally and thus simulate threading with Protothread mechanism. This library implements it and helps you to:

schedule, manage and simplify parallel, periodic tasks
define fixed or variable time between runs
organize the code in any type of project
- put all sensor readings in a thread
- keep the main loop clean
hide the complexity of thread management
run "pseudo-background" tasks using Timer interrupts

Blinking an LED is often the very first thing an Arduino user learns. And this demonstrates that periodically performing one single task, like toggling the LED state, is really easy. However, one may quickly discover that managing multiple periodic tasks is not so simple if the tasks have different schedule.

The user defines a Thread object for each of those tasks, then lets the library manage their scheduled execution.

It should be noted that these are not “threads” in the real computer-science meaning of the term: tasks are implemented as functions that are run periodically. On the one hand, this means that the only way a task can yield the CPU is by returning to the caller, and it is thus inadvisable to delay() or do long waits inside any task. On the other hand, this makes ArduinoThreads memory friendly, as no stack need to be allocated per task.

Installation

Download the Master branch from gitHub.
Unzip and modify the Folder name to "ArduinoThread" (Remove the '-master' suffix)
Paste the modified folder on your Library folder (On your Libraries folder inside Sketchbooks or Arduino software).
Restart the Arduino IDE

If you are here just because another library requires a class from ArduinoThread, then you are done now .

Getting Started

There are many examples showing many ways to use it. We will explain Class itself, what it does and how it does.

There are three main classes included in the library: Thread, ThreadController and StaticThreadController (both controllers inherit from Thread).

Thread: Basic class, witch contains methods to set and run callbacks, check if the Thread should be run, and also creates a unique ThreadID on the instantiation.
ThreadController: Responsible for managing multiple Threads. Can also be thought of as "a group of Threads", and is used to perform run in every Thread ONLY when needed.
StaticThreadController: Slightly faster and smaller version of the ThreadController. It works similar to ThreadController, but once constructed it can't add or remove threads to run.

Create Thread instance:

Thread myThread = Thread();
// or, if initializing a pointer
Thread* myThread = new Thread();

Setup thread behaviour

You can configure many things:

myThread.enabled = true; // Default enabled value is true
myThread.setInterval(10); // Setts the wanted interval to be 10ms
/*
	This is useful for debugging
	(Thread Name is disabled by default, to use less memory)
	(Enable it by definint USE_THREAD_NAMES on 'Thread.h')
*/
myThread.ThreadName = "myThread tag";
// This will set the callback of the Thread: "What should I run"?
myThread.onRun(callback_function); // callback_function is the name of the function

Running threads manually

Ok, creating threads isn't too hard, but what do we do with them?

// First check if our Thread should be run
if(myThread.shouldRun()){
  // Yes, the Thread should run, let's run it
  myThread.run();
}

Running threads via a controller

If you had 3, 5 or 100 threads, managing them manually could become tedious. That's when ThreadController or StaticThreadController comes into play and saves you the repetitive thread management parts of code.

// Instantiate new ThreadController
ThreadController controller = ThreadController();
// Now, put bunch of Threads inside it, FEED it!
controller.add(&myThread); // Notice the '&' sign before the thread, IF it's not instantied as a pointer.
controller.add(&hisThread);
controller.add(&sensorReadings);
...

// Instantiate a new StaticThreadController with the number of threads to be supplied as template parameter
StaticThreadController<3> controller (&myThread, &hisThread, &sensorReadings);
// You don't need to do anything else, controller now contains all the threads.
...

You have created, configured, grouped it. What is missing? Yes, whe should RUN it! The following will run all the threads that NEED to run.

// call run on a Thread, a ThreadController or a StaticThreadController to run it
controller.run();

Congratulations, you have learned the basics of the ArduinoThread library. If you want to learn more, see bellow.

Tips and Warnings

ThreadController is not of a dynamic size (like a LinkedList). The maximum number of threads that it can manage is defined in ThreadController.h (default is 15)
☢ When extending the Thread class and overriding the run() function, remember to always call runned(); at the end, otherwise the thread will hang forever.
It's a good idea, to create a Timer interrupt and call a ThreadController.run() there. That way, you don't need to worry about reading sensors and doing time-sensitive stuff in your main code (loop). Check ControllerWithTimer example.
Inheriting from Thread or even ThreadController is always a good idea. For example, I always create base classes of sensors that extends Thread, so that I can "register" the sensors inside a ThreadController, and forget about reading sensors, just having the values available in my main code. Check the SensorThread example.
Remember that ThreadController is in fact, a Thread itself. If you want to group threads and manage them together (enable or disable), think about putting all of them inside a ThreadController, and adding this ThreadController to another ThreadController (YES! One inside another). Check ControllerInController example.
StaticThreadController is optimal when you know the exact number of threads to run. You cannot add or remove threads at runtime, but it doesn't require additional memory to keep all the treads together, doesn't limit the number of thread (except for available memory) and the code may be slightly better optimized because all the threads always exist and no need to do any runtime checks.
Check the full example CustomTimedThread for a cool application of threads that run for a period, after a button is pressed.
Running tasks on the Timer interrupts must be thought though REALLY carefully
- You mustn't use sleep() inside an interrupt, because it would cause an infinite loop.
- Things execute quickly. Waiting too loooong on a interrupt, means waiting too loooong on the main code (loop)
- Things might get "scrambled". Since Timers interrupts actually "BREAK" your code in half and start running the interrupt, you might want to call noInterrupts and interrupts on places where cannot be interrupted:

noInterrupts();
// Put the code that CANNOT be interrupted...
interrupts(); // This will enable the interrupts egain. DO NOT FORGET!

Library Reference

Configuration options

Thread

bool Thread::enabled - Enables or disables the thread. (doesn't prevent it from running, but will return false when shouldRun() is called)
void Thread::setInterval() - Schedules the thread run interval in milliseconds
bool Thread::shouldRun() - Returns true, if the thread should be run. (Basically,the logic is: (reached time AND is enabled?).
void Thread::onRun(<function>) - The target callback function to be called.
void Thread::run() - Runs the thread (executes the callback function).
int Thread::ThreadID - Theoretically, it's the memory address. It's unique, and can be used to compare if two threads are identical.
int Thread::ThreadName - A human-readable thread name. Default is "Thread ThreadID", eg.: "Thread 141515". Note that to enable this attribute, you must uncomment the line that disables it on Thread.h
protected: void Thread::runned() - Used to reset internal timer of the thread. This is automatically called AFTER a call to run().

ThreadController

void ThreadController::run() - Runs the all threads grouped by the controller, but only if needed (if shouldRun() returns true);
bool ThreadController::add(Thread* _thread) - Adds a the thread to the controller, and returns true if succeeded (returns false if the array is full).
void ThreadController::remove(Thread* _thread) - Removes the thread from the controller
void ThreadController::remove(int index) - Removes the thread at the index position
void ThreadController::clear() - Removes ALL threads from the controller
int ThreadController::size(bool cached = true) - Returns number of threads allocated in the ThreadController. Re-calculates thread count if cached is false
Thread* ThreadController::get(int index) - Returns the thread at the index position

StaticThreadController

void StaticThreadController::run() - Runs all the threads within the controller, but only if needed (if shouldRun() returns true);
int StaticThreadController::size() - Returns how many Threads are allocated inside the controller.
Thread* ThreadController::get(int index) - Returns the thread at the index position - or nullptr if index is out of bounds.

eddskt/ArduinoThread