A custom control system built for 2 dome projection system showflats. This repository contains the code built on top of Arduino Ethernet to automate the sytem power up and down for the following AV devices:
- An amplifier, originally used infrared which at later stage updated to use TCP socket for relability
- WatchOut cluster display computers (using relay)
- Projectors (using TCP sockets)
- Port 1 (Previously Unused) : Pin 4, Ophir Duo
- Port 2 : Pin 6, Off
- Port 3 : Pin 8, Marina One
- Port 4 : Pin A2, On
- Projectors : 192.168.1-8:4532
- Amplifier : 192.168.1.10:23
- WatchOut Cluster : 192.168.1.51:3039
- Control board : 192.168.1.48:3038