eez-open/modular-psu-firmware

Issues

• Add SCPI watchdog commands

  #327 opened 3 months ago by fietser28
  0

• Output enable with user switch

  #326 opened 8 months ago by mvladic
  0

• Display max current drawn per PS since output activated

  #325 opened 9 months ago by wohali
  0

• Set SDRAM common burst read option to Enabled

  #324 opened 9 months ago by mvladic
  0

• Use BIN file instead of HEX file for uploading DIB module firmware

  #323 opened 10 months ago by mvladic
  0

• Auto start script not working in 1.7.5

  #317 opened a year ago by mikeg1957
  1

• The external voltage protection does not work if the outputs are connected in series

  #322 opened a year ago by prasimix
  1

• Auto-recall fails when trigger is set to LIST

  #316 opened a year ago by fusedFET
  1

• External voltage protection doesn't work in INHibit mode

  #315 opened a year ago by prasimix
  1

• output:protection:measure status not always in sync with OFF color on display

  #320 opened a year ago by fietser28
  0

• output:protection:measure not restored from temporary profile

  #319 opened a year ago by fietser28
  0

• Feature request: enable Link-Local addresses on Ethernet

  #318 opened a year ago by brianbienvenu
  0

• The current autoranging is stuck in a low range when the output is turned on

  #314 opened 2 years ago by prasimix
  1

• Rule for accepting a new ethernet connection and releasing the old one

  #311 opened 2 years ago by mvladic
  1

• Autorecall info in log file

  #313 opened 2 years ago by prasimix
  1

• OFF state current settings

  #312 opened 2 years ago by prasimix
  0

• DLOG runtime in overlay doesn't update or shows wrong value

  #310 opened 2 years ago by fietser28
  0

• func gen: pulse width changes also changes when period is changed

  #308 opened 2 years ago by fietser28
  0

• source:volt? is not correct on MIO168 AOUT channels when funcgen is active

  #307 opened 2 years ago by fietser28
  0

• MIO168+AFE3: AIN3+AIN4 Power calculation is off?

  #305 opened 2 years ago by fietser28
  1

• MIO168 add RMS option for AIN1 and AIN2 on analog input screen

  #303 opened 3 years ago by fietser28
  0

• MIO168 DLOG has glitch when AC analysis enabled

  #302 opened 3 years ago by fietser28
  0

• Func gen settings are not remembered in the profile when channels are coupled

  #301 opened 3 years ago by prasimix
  0

• Maximized view channel navigation issue

  #300 opened 3 years ago by prasimix
  0

• Increase variable limit and also to return error if limit is reached for DISP:DIALog:DATA command.

  #299 opened 3 years ago by mikeg1957
  0

• DCP405: triggers unwanted Standby

  #298 opened 3 years ago by fusedFET
  7

• DCP405 Channel voltage wrong after standby

  #297 opened 3 years ago by fusedFET
  4

• Open the keyboard when applet is running resets the BB3 (1.8Alpha2)

  #296 opened 3 years ago by mikeg1957
  0

• Auto start script is deselected on exit

  #295 opened 3 years ago by prasimix
  0

• Function generator: small frequency difference between DCP and MIO168 module

  #294 opened 3 years ago by fietser28
  0

• Versioning scheme and (in)compatible changes

  #293 opened 3 years ago by fietser28
  0

• EEZ flow start after displaying pinout page restarts BB3

  #286 opened 3 years ago by fietser28
  1

• EEZ flow: Button widgets don't always show updated text

  #285 opened 3 years ago by fietser28
  1

• Text widget action generates a number, where integer is expected

  #280 opened 3 years ago by fietser28
  1

• EEZ flow comparison in switch not always working as expected

  #279 opened 3 years ago by fietser28
  1

• EEZ flow SCPI string has quotes

  #277 opened 3 years ago by fietser28
  4

• Writing a string to a variable doesn't work

  #278 opened 3 years ago by fietser28
  2

• EEZ Flow empty select causes restart of BB3

  #276 opened 3 years ago by fietser28
  1

• EEZ flow Progressbar overflows

  #274 opened 3 years ago by fietser28
  3

• Add applet description in file manager

  #292 opened 3 years ago by prasimix
  0

• BB3 restarts when pressing X button in DLOG screen

  #291 opened 3 years ago by fietser28
  0

• (MIO168) feature request: display analog input/output values in ‘sensor’ mode

  #290 opened 3 years ago by fietser28
  2

• EEZ flow in SCPI command reading a negative value stores wrong value

  #289 opened 3 years ago by fietser28
  2

• DCP405 current readout unstable with noisy load

  #288 opened 3 years ago by brianbienvenu
  0

• DCM224 values and units aren't synchronised on front panel

  #287 opened 3 years ago by brianbienvenu
  1

• SCPI: 'inst (101)' doesn't generate an error message

  #284 opened 3 years ago by fietser28
  0

• EEZ flow output action restarts BB3

  #283 opened 3 years ago by fietser28
  0

• Add SCPI query `SCRipt:RUN?` to find out the name of running script

  #282 opened 3 years ago by mvladic
  1

• Problem with DCP405 calibration

  #275 opened 3 years ago by prasimix
  1

• Add SCPI query to find out the size of an individual file

  #281 opened 3 years ago by mvladic
  0