Introduction
This module helps you to communicate with the Adafruit Bluefruit Connect app or use its protocols.
Dependencies
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-bluefruitconnect
To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-bluefruitconnect
To install in a virtual environment in your current project:
mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-bluefruitconnect
Usage Example
Normally this library is used with the
Adafruit_CircuitPython_BluefruitConnect
library
(adafruit_bluefruit_connect
). The included examples use that library.
Below is a simple standalone example.
from adafruit_bluefruit_connect.color_packet import ColorPacket
from adafruit_bluefruit_connect.gyro_packet import GyroPacket
# [uart setup omitted]
color_packet = ColorPacket((70,75,80))
gyro_packet = GyroPacket.from_bytes(packet_buf)
uart.write(gyro_packet.to_bytes())
Contributing
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
Documentation
For information on building library documentation, please check out this guide.