elkayem/midi2cv

Issues

• Don't wire MIDI pin 2 to ground

  #18 opened a year ago by allisonkarlitskaya
  2

• missing digital out on 11 ?

  #17 opened 3 years ago by ericbalcon
  2

• optocoupler alternatives

  #14 opened 3 years ago by otivlasc
  1

• errors compiling

  #16 opened 3 years ago by nickademus420
  3

• OP Amp connection to -12V

  #15 opened 5 years ago by atulrnt
  1

• Adapting the Project for 6-Voice Polyphony

  #10 opened 5 years ago by orchestron
  2

• Pitch changes to Note output

  #11 opened 5 years ago by GarryGNsk
  1

• USBMIDI version

  #9 opened 5 years ago by 66hertz
  2

• midi2cv with protools

  #8 opened 5 years ago by nickmina
  5

• 1K resistors on gate outputs

  #7 opened 5 years ago by aluedt
  2

• Using software serial is unreliable

  #13 opened 5 years ago by philippejadin
  1

• Protoboard component placement

  #12 opened 5 years ago by philippejadin
  3

• Solder Arduino Outputs directly to CV Ins

  #5 opened 6 years ago by BLACKAVID
  1

• Power

  #6 opened 6 years ago by Kooza25
  1

• midi2cv.sch is corrupt

  #4 opened 6 years ago by davidcool
  2

• clock starting in between beats

  #3 opened 6 years ago by schmynth
  3

• SPI out not working?

  #2 opened 7 years ago by mccdam28
  9

• banana jack to 3.5mm jack

  #1 opened 7 years ago by dasmasdas
  3