Logster is a utility for reading log files and generating metrics in Graphite or Ganglia or Amazon CloudWatch. It is ideal for visualizing trends of events that are occurring in your application/system/error logs. For example, you might use logster to graph the number of occurrences of HTTP response code that appears in your web server logs.
Logster maintains a cursor, via logtail, on each log file that it reads so that each successive execution only inspects new log entries. In other words, a 1 minute crontab entry for logster would allow you to generate near real-time trends in Graphite or Ganglia or Amazon CloudWatch for anything you want to measure from your logs.
This tool is made up of a framework script, logster, and parsing scripts that are written to accommodate your specific log format. Two sample parsers are included in this distribution. The parser scripts essentially read a log file line by line, apply a regular expression to extract useful data from the lines you are interested in, and then aggregate that data into metrics that will be submitted to Ganglia or Graphite or Amazon CloudWatch. Take a look through the sample parsers, which should give you some idea of how to get started writing your own.
The logster project was created at Etsy as a fork of ganglia-logtailer (https://bitbucket.org/maplebed/ganglia-logtailer). We made the decision to fork ganglia-logtailer because we were removing daemon-mode from the original framework. We only make use of cron-mode, and supporting both cron- and daemon-modes makes for more work when creating parsing scripts. We care strongly about simplicity in writing parsing scripts -- which enables more of our engineers to write log parsers quickly.
Logster depends on the "logtail" utility that can be obtained from the logcheck package, either from a Debian package manager or from source:
http://packages.debian.org/source/sid/logcheck
RPMs for logcheck can be found here:
http://rpmfind.net/linux/rpm2html/search.php?query=logcheck
Once you have logtail installed via the logcheck package, you make want to look
over the actual logster script itself to adjust any paths necessary. Then the
only other thing you need to do is run the installation commands from the
setup.py file:
$ sudo python setup.py install
You can test logster from the command line. There are two sample parsers: SampleLogster, which generates stats from an Apache access log; and Log4jLogster, which generates stats from a log4j log. The --dry-run option will allow you to see the metrics being generated on stdout rather than sending them to Ganglia or Graphite or Amazon CloudWatch.
$ sudo /usr/bin/logster --dry-run --output=ganglia SampleLogster /var/log/httpd/access_log
$ sudo /usr/bin/logster --dry-run --output=graphite --graphite-host=graphite.example.com:2003 SampleLogster /var/log/httpd/access_log
You can use the provided parsers, or you can use your own parsers by passing the complete module and parser name. In this case, the name of the parser does not have to match the name of the module (you can have a logster.py file with a MyCustomParser parser). Just make sure the module is in your Python path - via a virtualenv, for example.
$ /env/my_org/bin/logster --dry-run --output=stdout my_org_package.logster.MyCustomParser /var/log/my_custom_log
Additional usage details can be found with the -h option:
$ ./logster -h
Usage: logster [options] parser logfile
Tail a log file and filter each line to generate metrics that can be sent to
common monitoring packages.
Options:
-h, --help show this help message and exit
--logtail=LOGTAIL Specify location of logtail. Default
/usr/sbin/logtail2
-p METRIC_PREFIX, --metric-prefix=METRIC_PREFIX
Add prefix to all published metrics. This is for
people that may multiple instances of same service on
same host.
-x METRIC_SUFFIX, --metric-suffix=METRIC_SUFFIX
Add suffix to all published metrics. This is for
people that may add suffix at the end of their
metrics.
--parser-help Print usage and options for the selected parser
--parser-options=PARSER_OPTIONS
Options to pass to the logster parser such as "-o
VALUE --option2 VALUE". These are parser-specific and
passed directly to the parser.
--gmetric-options=GMETRIC_OPTIONS
Options to pass to gmetric such as "-d 180 -c
/etc/ganglia/gmond.conf" (default). These are passed
directly to gmetric.
--graphite-host=GRAPHITE_HOST
Hostname and port for Graphite collector, e.g.
graphite.example.com:2003
--statsd-host=STATSD_HOST
Hostname and port for statsd collector, e.g.
statsd.example.com:8125
--aws-key=AWS_KEY Amazon credential key
--aws-secret-key=AWS_SECRET_KEY
Amazon credential secret key
--nsca-host=NSCA_HOST
Hostname and port for NSCA daemon, e.g.
nsca.example.com:5667
--nsca-service-hostname=NSCA_SERVICE_HOSTNAME
<host_name> value to use in nsca passive service
check. Default is "sandbox.bbc.co.uk"
-s STATE_DIR, --state-dir=STATE_DIR
Where to store the logtail state file. Default
location /var/run
-l LOG_DIR, --log-dir=LOG_DIR
Where to store the logster logfile. Default
location /var/log/logster
-o OUTPUT, --output=OUTPUT
Where to send metrics (can specify multiple times).
Choices are 'graphite', 'ganglia', 'cloudwatch',
'nsca' , 'statsd', or 'stdout'.
--stdout-separator=STDOUT_SEPARATOR
Seperator between prefix/suffix and name for stdout.
Default is "_".
-d, --dry-run Parse the log file but send stats to standard output.
-D, --debug Provide more verbose logging for debugging.
- Fork the project
- Add your feature
- If you are adding new functionality, document it in the README
- Verify your code by running the test suite, and adding additional tests if able.
- Push the branch up to GitHub (bonus points for topic branches)
- Send a pull request to the etsy/logster project.
If you have questions, you can find us on IRC in the #codeascraft channel on Freenode.