/pi_piper

Event driven Raspberry Pi GPIO programming in Ruby

Primary LanguageRuby

Overview

Pi Piper brings event driven programming to the Raspberry Pi's GPIO pins. Pi Piper works with all revisions of the Raspberry Pi, and has been tested with Ruby 1.9.3 under both Raspbian "wheezy" and Occidentalis v0.2.

To get started:

If you do not already have Ruby installed, first you'll need to:

sudo apt-get install ruby ruby1.9.1-dev

Despite one of the packages being titled "ruby1.9.1-dev", the above command will install Ruby 1.9.3 (as of January 2013) and the Ruby dev tools.

To install Pi Piper:

sudo gem install pi_piper

GPIO

The GPIO pins (or General Purpose I/O pins) are the primary "do anything" pins on the Raspberry Pi. Reading inputs from them is as simple as:

require 'pi_piper'
include PiPiper

watch :pin => 23 do
  puts "Pin changed from #{last_value} to #{value}"
end

#Or

after :pin => 23, :goes => :high do
  puts "Button pressed"
end

PiPiper.wait

Your block will be called when a change to the pin's state is detected.

Additionally you can use pins as output too:

pin = PiPiper::Pin.new(:pin => 17, :direction => :out)
pin.on
sleep 1
pin.off

SPI

Starting with version 1.2, Pi Piper offers SPI support.

PiPiper::Spi.begin do 
  puts write [0x01, 0x80, 0x00] 
end

Documentation

API documentation for Pi Piper can be found at rdoc.info.

Example projects

Looking for more examples/sample code for Pi Piper? Then check out the following example projects, complete with circuit diagrams:

License

Copyright (c) 2013, Jason Whitehorn All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Proudly developed exclusively on a Raspberry Pi