logger

Logger is a simple logging facility for the C language. It is possible to output logging information to different output stream and to use different logging severities.

Table of contents

[TOC]

Introduction

Logger needs to be enabled using the global define LOGGER_ENABLE when compiling the sources. Otherwise all functions will be excluded from compilation.

Logger provides two functions to print messages. The first one is logger() which takes a format string and several arguments like printf(). The second one is logger_va() which takes a format string and a va_list as argument like vprintf().

Logger supports multiple IDs. A logger ID is requested with a call to logger_id_request() and released with logger_id_release(). Multiple calls to logger_id_request() with the same name as argument result in the same ID. Thus it inherits all already done configurations. A ID needs to be enabled by logger_id_enable() and could be disabled by logger_id_disable(). The function logger_id_generates_output() provides a way to check if an ID and level combination would generate any output. This is useful to avoid expensive calculations if subsequent calls to logger() would never output the results.

Each ID has its own severity which needs to be set by logger_id_level_set(). Only calls to logger() with the same or higher severity are considered for output. This way it is possible to enable logging only for parts of a program. The function logger_id_level_get() can be used to get the current value, store it, increase the level for some part of thew program and restore it afterwards. Alternatively it is possible to assign a bitmask of severity levels to an ID using the function logger_id_level_mask_set(). The currently set bitmask can be retrieved using the function logger_id_level_mask_get().

By default an ID has no level assigned and thus generates no output until a level is defined using logger_id_level_set() or logger_id_level_mask_set().

Each ID has its own prefix assigned. By default each ID prints the prefix "LOGGER_ID_NAME:LOGGER_LEVEL:FUNCTION:LINE:". The prefix is changed by logger_id_prefix_set() and it is possible to get the current value for later restore with logger_id_prefix_get(). The prefix elements could be combined using |. Available prefix elements are:

Prefix element	Description
`LOGGER_PFX_EMPTY`	Empty prefix.
`LOGGER_PFX_DATE`	`"DATE:"`
`LOGGER_PFX_NAME`	`"LOGGER_ID_NAME:"`
`LOGGER_PFX_LEVEL`	`"LOGGER_LEVEL:"`
`LOGGER_PFX_FILE`	`"FILE_NAME:"`
`LOGGER_PFX_FUNCTION`	`"FUNCTION_NAME:"`
`LOGGER_PFX_LINE`	`"LINE:"`
`LOGGER_PFX_ALL`	All above prefixes in above order.

For backward compatibility the following prefix enumerations are also supported:

Prefix enumeration	Generated prefix
`LOGGER_PREFIX_EMPTY`	`""`
`LOGGER_PREFIX_NAME`	`"LOGGER_ID_NAME:"`
`LOGGER_PREFIX_SHORT`	`"LOGGER_ID_NAME:LOGGER_LEVEL:"`
`LOGGER_PREFIX_FUNCTION`	`"LOGGER_ID_NAME:LOGGER_LEVEL:FUNCTION:LINE:"`
`LOGGER_PREFIX_FILE`	`"LOGGER_ID_NAME:LOGGER_LEVEL:FILE:LINE:"`
`LOGGER_PREFIX_FULL`	`"LOGGER_ID_NAME:LOGGER_LEVEL:FILE:FUNCTION:LINE:"`

It is possible to give each logger ID different foreground and background color as well as text attributes with logger_id_color_console_set() or logger_id_color_string_set() and reset them with logger_id_color_reset(). Colors are changed by escape sequences and only work on STDOUT and STDOUT. File output does not contain any escape sequences by default.

The standard prefix can be changed using the function logger_prefix_set() and the current setting can be retrieved with logger_prefix_get() for later restore. The standard prefix is used for all IDs but the ones explicitly changed.

To get any messages an output needs to be registered to logger. Any stream of type FILE is supported and multiple outputs can be registered. Registration is done with logger_output_register() deregistration with logger_output_deregister(). To check if an output had already been registered the function logger_output_is_registered() can be used. Like IDs every output gets a severity. This makes it possible to write all messages with LOGGER_INFO to a file and only output messages with LOGGER_ERR to STDOUT. Setting the level ist done with logger_output_level_set(). As for IDs the current value can be get with logger_output_level_get(). There are also the corresponding functions logger_output_level_mask_set() and logger_output_level_mask_get() to manipulate the level bitmask. Additional it is possible to enable and disable colors for each output using the functions logger_output_color_enable() and logger_output_color_disable(). There is also a function logger_output_color_is_enabled() to check the current state. By default only STDOUT and STDERR use color. For other file streams color is disabled. Beside the file stream output it is possible to register a user defined callback function to handle the formatted message string. This is useful for example to keep the messages in a ring buffer in memory or to show them in a message window of a graphical toolkit. The functions logger_output_function_register(), logger_output_function_deregister(), logger_output_function_is_registered(), logger_output_function_level_set(), logger_output_function_level_get(), logger_output_function_level_mask_set(), logger_output_function_level_mask_get(), logger_output_function_color_enable(), logger_output_function_color_disable(), logger_output_function_color_is_enabled() can be used to control the function callback output.

By default an output has no level assigned and thus outputs no messages until a level is defined using logger_output_level_set() or logger_output_function_level_mask_set().

Additionally there are functions logger_id_output_register(), logger_id_output_deregister(), logger_id_output_is_registered(), logger_id_output_level_set(), logger_id_output_level_get(), logger_id_output_level_mask_set(), logger_id_output_level_mask_get(), logger_id_output_color_enable(), logger_id_output_disable() and logger_id_output_color_is_enabled() functions to handle ID specific file stream outputs. There are also the user specific callback functions logger_id_output_function_register(), logger_id_output_function_is_registered() logger_id_output_function_deregister(), logger_id_output_function_level_set(), logger_id_output_function_level_get(), logger_id_output_function_level_mask_set(), logger_id_output_function_level_mask_get(), logger_id_output_function_color_enable(), logger_id_output_function_color_disable() and logger_id_output_function_color_is_enabled() available. This way it is possible to write output of a specific subsystem to a separate file.

By default an ID specific output has no level assigned and thus outputs no messages until a level is defined using logger_id_output_level_set() or logger_id_output_level_mask_set().

Keep in mind that a message is only printed if the severity of the logger() call is higher or equal to the level of the according ID AND the severity is higher or equal to the level of the output.

When logger is compiled with LOGGER_FORCE_FLUSH defined it forcibly flushes every stream after every output. This will produce horribly bad performance but might be helpful to debug aborting programs.

Example

Below is a basic example for using logger. Store it as main.c and compile with:

gcc -DLOGGER_ENABLE -Iinclude -o main main.c src/logger.c

#include "logger.h"
#include <time.h>
#include <stdio.h>

static void printer(const char *string)
{
  char   date[200];
  time_t t;

  t = time(NULL);
  strftime(date, sizeof(date), "%Y-%m-%d %H:%M:%S", localtime(&t));
  printf("%s: %s", date, string);
}


int main(void)
{
  FILE        *stream;
  logger_id_t id = logger_id_unknown;

  /* check logger version */
  if (LOGGER_VERSION != logger_version()) {
    return(1);
  }

  /* initialize logger */
  logger_init();

  /* open a file as output for all messages */
  stream = fopen("logfile", "w");
  logger_output_register(stream);
  logger_output_level_set(stream, LOGGER_DEBUG);

  /* open stdout as output for messages above LOGGER_ERR */
  logger_output_register(stdout);
  logger_output_level_set(stdout, LOGGER_ERR);

  /* register user function for messages above LOGGER_INFO */
  logger_output_function_register(printer);
  logger_output_function_level_set(printer, LOGGER_INFO);

  /* get a logging id, enable it and set log level */
  id = logger_id_request("logger_test_id");
  logger_id_enable(id);
  logger_id_level_set(id, LOGGER_INFO);
  logger_id_prefix_set(id, (LOGGER_PFX_DATE | LOGGER_PFX_NAME | LOGGER_PFX_LEVEL | LOGGER_PFX_FILE | LOGGER_PFX_FUNCTION | LOGGER_PFX_LINE));
  logger_color_prefix_enable();
  logger_color_message_enable();
  logger_id_color_console_set(id, LOGGER_FG_GREEN, LOGGER_BG_BLACK, LOGGER_ATTR_BRIGHT | LOGGER_ATTR_UNDERLINE);

  /* do the logging */
  logger(id, LOGGER_DEBUG,    "id %d - LOGGER_DEBUG   in line %d\n", id, __LINE__); /* nothing written */
  logger(id, LOGGER_INFO,     "id %d - LOGGER_INFO    in line %d\n", id, __LINE__); /* written to logfile */
  logger(id, LOGGER_NOTICE,   "id %d - LOGGER_NOTICE  in line %d\n", id, __LINE__); /* written to logfile */
  logger(id, LOGGER_WARNING,  "id %d - LOGGER_WARNING in line %d\n", id, __LINE__); /* written to logfile */
  logger(id, LOGGER_ERR,      "id %d - LOGGER_ERR     in line %d\n", id, __LINE__); /* written to logfile and stdout */
  logger(id, LOGGER_CRIT,     "id %d - LOGGER_CRIT    in line %d\n", id, __LINE__); /* written to logfile and stdout */
  logger(id, LOGGER_ALERT,    "id %d - LOGGER_ALERT   in line %d\n", id, __LINE__); /* written to logfile and stdout */
  logger(id, LOGGER_EMERG,    "id %d - LOGGER_EMERG   in line %d\n", id, __LINE__); /* written to logfile and stdout */

  /* release id */
  logger_id_release(id);

  /* deregister user function */
  logger_output_function_deregister(printer);

  /* deregister stdout output */
  logger_output_deregister(stdout);

  /* deregister file output */
  logger_output_deregister(stream);

  /* close file */
  fclose(stream);

  return(0);
}

Version history

vX.Y.Z (XXXX-YY-ZZ)
- Compress repeated messages. Only print once and show the number of repeats.
- Add possibility to limit number of messages per second.
v4.0.0 (2014-03-20)
- Add ability to set bitmasks for levels to show for example only a range of severities.
- Unify outputs for each ID so that a message is never printed twice to the same output.
- Add function to check if a ID and level combination would generate an output.
- Add Ruby based test suite.
v3.2.0 (2013-10-23)
- Add logger_va() which is a variant of logger that takes a va_list argument instead of multiple arguments.
v3.1.0 (2013-10-23)
- Add functions to change color markup strings for prefix an message. This makes it possible to use user defined color strings i.e. HTML markup.
- Console text attributes can be combined.
- Add special console colors LOGGER_FG_UNCHANGED and LOGGER_BG_UNCHANGED as dummy colors to keep current foreground and background color.
v3.0.0 (2013-08-30)
- Complete rewrite of prefix generation with backward compatible interface.
- Add date/time prefix
- Add functions to enable/disable colors for each output
- Add possibility to register a user callback function as output. This way the user can store the formated messages i.e. in a ring buffer or display them in a gui window.
- Performance improvements
- Add doxygen to build environment
- Deprecate some functions. Provide legacy functions for backward compatibility.
v2.1.1 (2013-07-10)
- Bugfix release
v2.1.0 (2013-07-10)
- More compile time defines to configure logger
- Strip path from filename in logging prefix
- Reduce the number of color strings in output to the necessary ones
- Performance improvements
v2.0.1 (2013-02-14)
- Bugfix release
v2.0.0 (2012-12-05)
- Possibility to change logging prefix for each ID independent
- Support for logging strings containing multiple \n characters
- Add possibility to define logging ID specific outputs
- Possibility to flush all outputs after each line
- Add functions to check state of logger, logging IDs and streams
- Add function to query logging level name as string
- Possibility to color prefix depending on logging severity
- Make colors configurable at runtime
- Performance improvements
- Add README
v1.1.3 (2012-07-24)
- Bugfix release
v1.1.2 (2012-07-06)
- Bugfix release
v1.1.1 (2012-07-05)
- Bugfix release
v1.1.0 (2012-07-05)
- 32/64 bit portability
- Change logger_id_request() to take a symbolic name
v1.0.1 (2011-10-26)
- Introduce logger version and access functions / macros
- C++ compatibility
v1.0.0 (2011-05-26)
- Initial release

embear/logger

logger

Introduction

Example

Version history