[Logitech (Saitek) X56 Elite Dangerous V3.3-Beyond Profile] This profile is build for VR, Non-VR and head-tracking systems and is VoiceAttack/HCSVoicePacks compatible! The profile is quite extensive and everything is divided over the 3 modes with almost no re-use of assigned buttons in other modes. The profile has 3 modes: - [M1 - Flight/Fight] - [M2 - Landing/Alternate Flight] - [S1 - SRV] Default Mode is M1. M1 is for your normal flying/supercruising/hyperspacing, combat and all things related. To land switch to Mode M2. This gives you an different set of controls just for landing. This mode is not much different then flying, except some "flight features" are disabled. This way I eliminated the accidental boost when landing. And Finally Mode S1, which is for SRV and will not have the other functions for flying. Last Update by CMDR Spliffz on 22 February 2019 -------------------------------------------------------- [How To Install] Step 1: Extract the .zip file. Copy the "X56Elite v3.3.0-beyond.3.0.binds" to your Elite Keybinds folder. Normally this is located in: "C:\Users\<yourusername>\AppData\Local\Frontier Developments\Elite Dangerous\Options\Bindings" Step 2: Make sure the X56 is NOT running any profile on the Logitech software! Right click on the X56 H.O.T.A.S icon on your taskbar. It's somewhere on the right side. It should be bright toxic green. Select "Clear". The Icon should be all white instead of green now. Step 3: Start up Elite Dangerous. Go to Options > Controls. At the top above the control list there is a dropdown menu. Click on it and select "X56Elite V3.3.0-Beyond". This will load in the keybindings. Step 4. Go play, Have some fun.